moparwash Well-known member Bronze Member Joined Aug 26, 2007 Messages 1,838 Location Pittsburgh,PA Apr 18, 2014 #1 After switching the timer?...(I know the dryness and temp pushbuttons wont work, but the allure of the lighted console is too good to pass up!) http://www.ebay.com/itm/321380170078
After switching the timer?...(I know the dryness and temp pushbuttons wont work, but the allure of the lighted console is too good to pass up!) http://www.ebay.com/itm/321380170078
B brucelucenta Well-known member Joined Jul 21, 2013 Messages 1,924 Apr 18, 2014 #2 Yes You could easily put this on your dryer.
kenmore71 Well-known member Bronze Member Joined Sep 20, 2010 Messages 1,724 Location Minneapolis, MN Apr 18, 2014 #3 You could, but with a couple of modifications. You will most likely need to drill a different set of holes to mount the timer correctly. You could, if you wanted to, install an additional thermostat and wire up the temperature switches.
You could, but with a couple of modifications. You will most likely need to drill a different set of holes to mount the timer correctly. You could, if you wanted to, install an additional thermostat and wire up the temperature switches.
moparwash Well-known member Bronze Member Joined Aug 26, 2007 Messages 1,838 Location Pittsburgh,PA Apr 18, 2014 #4 SOLD! I got it and will post how the transformation goes...now all I need is the shiny timer dial with timed dry (reg and perm press) and air fluff!
SOLD! I got it and will post how the transformation goes...now all I need is the shiny timer dial with timed dry (reg and perm press) and air fluff!
T tomturbomatic Well-known member Gold Member Joined May 21, 2001 Messages 21,849 Location Beltsville, MD Apr 19, 2014 #5 You can also buy the temperature switch and buttons from a 308, I think, which will be just two wider buttons for regular and low heat.
You can also buy the temperature switch and buttons from a 308, I think, which will be just two wider buttons for regular and low heat.
moparwash Well-known member Bronze Member Joined Aug 26, 2007 Messages 1,838 Location Pittsburgh,PA Apr 19, 2014 #6 Thats what im going to do...found some on ebay....now just need the timer dial in sungold!