Thanks to the advice which I received, I replaced the control switch and chime actuator and now the dryer shuts off. I have a new problem with it. The clothes are coming out of it with what appear to be grease streaks. They do NOT wash out. I checked the drum and there is no grease in it. What I have noticed is that the front of the drum is sitting low and apparently rubbing against the bottom of the frame. There are also pieces of cork inside the cabinet. This would lead me to believe that the bearing glides are bad. I see that these are riveted in. Can this be the cause of the dirty clothes? How big a repair is this and what exactly does it entail? Will the felt seals have to be changed as well due to contamination? One expert I spoke with says that the streaks are from metal filings. I suspect that the clothes might be getting pinched between the drum and the frame. I'm already into this for $79.00 and would hate to throw good money after bad. I was thinking about a GE DPSE810EGWT as a replacement. It sells for $520.00 plus tax. Any comments or advice are greatly appreciated.
Thanks,
Rich
Thanks,
Rich