GE 3 solenoid valve QUESTION

[jetcone]

Has any body had experience with this valve, is that 3rd solenoid for WARM, wash??? Would it work in our 50's 3 solenoid washers TOP LOAD and FRONT LOAD ( see Robert I do care!)

http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&item=370183256535&ssPageName=ADME:B:WNASIF:US:1123

 

[swestoyz]

I'm wondering about two things on this valve (based on the photo):

Are the coils low voltage (5,12,24 VDC or 12/24 VAC)? If so, would be dfficult to use.

Also, maybe the third coil is used for the second opening - similar to a log valve on Neptune?

 

[jetcone]

Ben do GE's have lo volt

water valves? Usually they are relay controlled and 110 volts.
I think that connector is designed to interface with a machine control board so it looks like 12 volt control but I could be wrong, (Robert always likes that!)

 

[swestoyz]

I'd suspect that if the valve is intended for a computer-controlled washer, it would more than likely control the water valve with low voltage. Any idea what type of GE this goes to?

The connector was the first trigger for me to think it might not be full 110v. I could always be wrong though.