surgilator_68
Well-known member
I would rather do it the correct way with a volt meter.
HA 806
- Thread starter gadgetgary
- Start date
Help Support :
toggleswitch
Well-known member
Mr. Gadget was correct!
This machine was acquired with the lid switch failed in the "ON" /operate position.
Apparently it had failed again randomly right after the machine had filled for the deep rinse, but it had failed in the "OFF" / stop position.
I had only previously bypassed the tub lamp to work and be "on" constantly, as long as the fluorescent control-panel illumination lamp was "on".
I was able to electrically bypass the lid switch, which resolved all issues.
NO CHARGIE! LOL
This machine was acquired with the lid switch failed in the "ON" /operate position.
Apparently it had failed again randomly right after the machine had filled for the deep rinse, but it had failed in the "OFF" / stop position.
I had only previously bypassed the tub lamp to work and be "on" constantly, as long as the fluorescent control-panel illumination lamp was "on".
I was able to electrically bypass the lid switch, which resolved all issues.
NO CHARGIE! LOL
Thank you Steve!
Happy 4th(at least we did not see any sparks with this project)!
My 806 'sunshine' is back in perfect working order!
Happy 4th(at least we did not see any sparks with this project)!
My 806 'sunshine' is back in perfect working order!
Similar threads
