Hoover Ecologic washer dryer 1300
- Thread starter andyg
- Start date
Help Support :
Hi Andy!
Hi Andy
You might've already tried this, but you could try emailing Gary (electron1100) incase he sees those more often than this site. His email address is available my clicking on his profile name.
I'd imagine Gary will be along soon anyway but if he's busy then sending an email might just save abit of time, ie if he only has time to check emails but not log into here - i know i tend to check my Hotmail account more than i check on here.
Sounds like you're running outta clothes so every minute saved is a bonus i guess!
Liam
Hi Andy
You might've already tried this, but you could try emailing Gary (electron1100) incase he sees those more often than this site. His email address is available my clicking on his profile name.
I'd imagine Gary will be along soon anyway but if he's busy then sending an email might just save abit of time, ie if he only has time to check emails but not log into here - i know i tend to check my Hotmail account more than i check on here.
Sounds like you're running outta clothes so every minute saved is a bonus i guess!
Liam
Ok Daft question but I have to ask....
Do the timers match exactly and are the serial numbers identical?
Austin
Do the timers match exactly and are the serial numbers identical?
Austin
With grateful thanks
Hi Liam and Austin,
Thanks very much for the tips. Gary must be busy, so thanks for the suggestion, I'll email him direct. From what I can tell the serial numbers are identical. I was thinking of putting the old timer back to see if the machine now worked. However, I would prefer to wait and see if Gary has the wiring info first.
Yep I'm running out of clothes, I've taken to hand washing and it would be so nice to put the kitchen back together, I feel like I'm living in a tip!!
Best wishes, Andy
Hi Liam and Austin,
Thanks very much for the tips. Gary must be busy, so thanks for the suggestion, I'll email him direct. From what I can tell the serial numbers are identical. I was thinking of putting the old timer back to see if the machine now worked. However, I would prefer to wait and see if Gary has the wiring info first.
Yep I'm running out of clothes, I've taken to hand washing and it would be so nice to put the kitchen back together, I feel like I'm living in a tip!!
Best wishes, Andy
electron1100
Well-known member
scans
Hello Andy
I have sent a scan to the email address you have on here of the wiring diagram for the timer you have in your machine, this timer it would appear was fitted to various machines of that type.
It might take you a while to get to grips with it but it might help.
with regards to re-fitting the old timer to see if the programmer constantly rotating problem goes away why not, go ahead.
one other question, when you were looking at the water pressure bottle did you blow into the rubber tube that goes up to the water level/pressure switch, if you blow into it you should hear two clicks from the level/pressure switch these being the two pre-set water level switches inside the level/pressure switch, if you hold the air in tube as long as you can to see if the air is leaking out, it is just another thought, if the switch was faulty or the air seal on it, or the tube was leaking this again would cause the problem you have.
Gary
Hello Andy
I have sent a scan to the email address you have on here of the wiring diagram for the timer you have in your machine, this timer it would appear was fitted to various machines of that type.
It might take you a while to get to grips with it but it might help.
with regards to re-fitting the old timer to see if the programmer constantly rotating problem goes away why not, go ahead.
one other question, when you were looking at the water pressure bottle did you blow into the rubber tube that goes up to the water level/pressure switch, if you blow into it you should hear two clicks from the level/pressure switch these being the two pre-set water level switches inside the level/pressure switch, if you hold the air in tube as long as you can to see if the air is leaking out, it is just another thought, if the switch was faulty or the air seal on it, or the tube was leaking this again would cause the problem you have.
Gary
