Jk29 lower oven issues

[carolinacat]

I finally got around to installing my jk29 dual self cleaning oven. Been sitting in the garage for a few years now. The lower oven is not working.I'm not familiar with it yet so when you turn the oven set knob to bake little red light come on above knob. Then turn the oven temp to a desired temp and I get no red light above it and neither element heats up.
Is the themp control switch the issue or is the temp probe an issue. What should I be checking into first. Thanks in advance.

 

[combo52]

Need the full model # to tell which control system your oven uses.

 

John L.

 

[carolinacat]

Jk2903dc thanks

 

[combo52]

First Thing to check is the lower oven sensor, it should read 17.5 Ohms, a quick check is to connect the two wires together going to the sensor and if the oven starts heating you know the sensor is bad [ do not leave the sensor wires shorted together as the oven will over heat badly and ruin the oven liner.

 

Sensor PT# is WB21X158, it is NLA from GE but still are readily available all over the internet.

 

If you replace it the wiring connections need to be done from the rear of the oven.

 

John L.

 

 

 

 

 

 

[carolinacat]

If I have to pull the oven from the wall im gonna be in trouble it was super tight to install. Thanks for the info I will get to checking it the weekend I hope.