Kenmore 70 Series Direct Drive Washer

[losangeles]

Hello everyone,
I recently rescued a Kenmore 70 series direct drive washer from the junkyard. Brought it home for some simple repairs and a good cleaning. Prior to the repairs the machine worked in all functions and cycles. All was going well till I got ready to close it up and my worst nightmare came to life. I have 3 sets of widgets left over. So, I broke the machine back down trying to figure out where the things went. I though I had it figured out but when the washer goes to spin it makes a very loud rattling sound. It washes and drains just fine, but the spin is very loud.
Here are the best pictures of the widgets left over. I can not find any diagrams that shows where these pieces would possibly go. The washer is model 110.82673110. If there is anyone that can help me out in anyway I will so greatly appreciate it. Thank you, Tommy (Losangeles)

 

[DADoES]

 
Those are remnants of the shipping strap. The pins fall into the cup when the strap is pulled, as nothing more than a storage method so they don't fall out onto the floor.  Toss it all to the trash.

 

[combo52]

DD Shipping Pins

As usual Glenn is right on the money,

 

The only thing I would add is you should recycle the steel pin and clip, you can recycle the steel stuff in your household recycling as they do magnetic separation.

 

John L.

 

[losangeles]

Kenmore 70 Series Direct Drive washer

Than you Glenn and John for your help in solving the issue of a rattling spin and mystery parts. Removed the pins and put the machine back together. Runs perfectly and much quieter. Thanks again Tommy