KitchenAid KD-12 Dishwasher

[Unimatic1140]

I am attaching some pictures of the dishwasher. The dishwasher is entact, all parts are in place. The motor has burned up, but everything was working fine at the time the motor went out.

The dishwasher is located in Newberry, SC.

If anyone is interested contact: [email protected]

Thanks for your help.

 

[Unimatic1140]

#2

 

[Brent-Aucoin]

Wow,
This machine is in great shape!
Brent

 

[alendaro]

Would it be possible to source a motor for it

and make it operational for daily use? I would love to do it - put it alongside my Miele when we redo the kitchen but I think my partner would shoot me first!

 

[jasonl]

OMG! Save this please! I wish I lived closer, I'd pick it up. Can't afford to ship it right now.

 

[panthera]

if only

If only I did not live too far away - Colorado or Germany, take your pick, I would be there tonight.
Sigh.
I sure hope someone gets this beauty. This is what a real KA looks like and not the stuff they, er - "produce" nowadays.

 

[sudsmaster]

My guess is that this is the same motor as on the KD-2P, which in turn may or may not be similar to that on the KDS-17A. I have both so I'll try to compare them to see if there's any possibility of swapping if someone can get hold of a parts KDS-17 or earlier.

Can't do it right now, on short lunch break.

 

[jamman_98]

This is in my Back Yard!

I can save this if someone can tell me if it can be fixed. My Dad lives less than an our away! I would love to use it for daily dishwashing. I hope someone knows the answer.

Joe
jamman_98

 

[gansky1]

It can be saved, and probably should be - if for no other reason than it's a Hobart. These come up from time to time around here and on ebay so finding a working motor shouldn't be too much trouble, patience will pay off.

 

[frontaloadotmy]

Do It

Joe , you need it for the new house!!!

 

[jamman_98]

Ok I

I've e-mailed the guy to see if it is still available. My dad lives in Columbia and has a truck and a place to keep it until I get a home of my own. Now I just have to talk him into making the trip. I'll keep everyone posted. If anyone sees a motor for it let me know.

Thanks to all
Joe
jamman_98

 

[filterflo]

Actually, I think I have a motor for that dishwasher in my parts storage........, if I remember correctly its a brand new never used motor still in the box..........

 

[jamman_98]

Awsome!

I hope you got the motor FilterFlow. I am not afraid of fixing anything appliance wise now that this site is around to help me.

Thanks
Joe
jamman_98

 

[sudsmaster]

Good thing, too, Filter-flo. I checked out my 17A and the motor on that is quite unlikely to work on the KD-12.

By the way, the KD-12 looks quite nice in stainless. This is one that should not be allowed to slip away.

 

[peterh770]

This dishwasher would look soooooo wonderful installed next to an O'Keefe and Merritt stove...

 

[jamman_98]

2 questions

1. Can the motor be rebuilt?
2. Where does the soap go?

Joe
jamman_98

 

[tomturbomatic]

The detergent goes in the little rectangular screen box that can be seen sitting in the right section of the silverware basket. The 12 had a different pump than the 10, but the same racks. The "BIG improvement" was the 1 minute purge at the start of the cycle to clear the line of cold water and help warm up the pump. Before the purge was introduced, you just poured some detergent on the door, closed, locked and started it. In the portable KD2-P, the little detergent box was placed between the two front to back bars, rods, whatever in the middle of the top rack so I guess if you had a lot of utensils and silverware, you could move the box up to the front of the top rack.

 

[fixerman]

Motors can be rewound and rebuilt. Robert had his Apex dishwasher motor rewound. I think it was about $350. You might want to bring it to a rebuilder to be sure it can be.

 

[Unimatic1140]

But remember, the motor being "burnt out" could mean a lot of things to an untrained eye. It could just be a loose wire.