Maytag wringer washer pump

Automatic Washer - The world's coolest Washing Machines, Dryers and Dishwashers

Help Support :

B

bobbyderegis

Well-known member
Joined
Dec 30, 2005
Messages
1,606
Location
Boston
Hi All!
I hope everyone's 4th of July was fun and safe. Does anyone have a new or good condition used pump for a Maytag wringer washer model N2LP that they would like to sell? The part # is A5317. They are NLA thru Maytag. I really want to get mine up and running.
Bobby in Boston
 
No go? I'll put the washer in storage, but if anyone comes across a pump, please let me know. It will be greatly appreciated! Hugs to all,
Bobby in Boston
 
Chuck, that would be terrific. I am having a tough time finding a pump. You would be doing me the greatest favor. Let me know what they say or what I can do. Big hug,
Bobby in Boston
 
Hi Bobby!

If you don't get one through "cehalstead"s lead----e-mail "Gansky". I don't remember that guy's name that Greg and I visited last year but if it had to do with Maytag wringers he had the parts!
Best wishes
Steve
 
maytag pump found

I think I have found the part for you on-line...go to www.RepairClinic.com and do a search...easy to do....put in the Maytag part no and there it is...let me know if this does not meet your needs and I will still call the guy here...
I bought a PowerFin agitator from them and found them to be very good...
 
Bobby if you can't find the part would you consider wiring in an electric pump, until you could find the actual part? I have used GE Washer top load pumps in a few of my automatics when there was no other option. They are small, quiet and work well.
 
Thanks, everyone.
I called Repair Clinic and they are going to see if their warehouses still have any in stock. They will get back to me in a couple days. I'll keep everyone posted. This wringer is in such terrific shape, but the pump looks like they tried to use it in a cement truck. You are all tops!
Bobby in Boston
 
Bobby, you should be able to get this. I just picked a new one up on ebay for my N2LPS and installed it. My pump was like yours... seized up, leaking and missing the wheel. I recently found out from Reliable Parts here in Canada that they still have a couple of these in stock so if you run into a dead end just email me.
Eddy
 
Eddy,
Thank you so much. I'll give Repair clinic a couple days to respond. If they are out of stock, I'll let you know. Many thanks again to all you wonderful folks.
Bobby in Boston
 
Hi All,
Repair Clinic just e-mailed, part is on the way. I'll keep everyone posted. Just got a junked Whirlpool DD washer to fix, and hopefully tommorrow an old working Norge. Does anyone have a few hundred extra square feet of floorspace I can have??????????? Yikes!
Bobby in Boston
 
Hi Bobby, that's just great! Glad you were able to find the part. Please let me know if you find some extra floor space, I need some too!
 
Well ... HOORAY, Bobby ... CONGRATS!! You will doing a wash in your N2LP before 'ya know it.

Did your washer ever drain without the pump? I mean, did you ever just lay the hose down in to a bucket to drain it? Lots of work, I know ... you will really ENJOY having the pump!!

Does your washer look like this one ... except with a gooseneck hose ending for the pump? This is from a piece of sales literature dated February 1969.

Geoff

7-18-2006-10-02-37--geoffdelp.jpg
 
Hi Geoff!
Yes, that's my wringer, with the gooseneck on top of the drainhose. I can't wait to get this working. I will need a new Maytag logo sticker because it's peeled in the corner, and I am considering repainting the lower portion of the cabinet, there are little spots of rust. I hope I can still get the spray paint from Maytag, if not, I'll leave well enough alone.
Robert, so many appliances, so little space! LOL to all.
Bobby in Boston
 
Bobby ... Yes, you can still get the lacquer finish. BUT ... you will also need the Leveler that goes with the paint. It's a "pain" to do.

Don Shier and I found that a can of Rust-o-leum "appliance" paint in white is a really close match to Maytag's white (actually, it's a little "whiter" if that's possible). The neat thing about the Rust-o-leum paint is that it doesn't need primer (although it's recommended).

Spray evenly ... just in the areas needed ... try not to "overspray".

Before you paint, take rubbing compound (No. 1 - white) and try removing the rust marks and any scratches. You will be surprised how nice a good rubbing compound brings out those finishes. I use liquid Turtle Wax for polishing; 2-3 coats. It's sort of fun to shine them all up!!

The Maytag logo is still available through your dealer (about $2.00 the last time I bought one).

Can't wait to see it ... Geoff
 
Thanx Geoff! It will be a while before I can paint- I'd like to tackle the wringer after I get the pump in place. Does anyone have a list of what is and what isn't still available for the N2LP's? I'd like to replace the turquoise plastic knobs and the lid gasket too. Once I get going on these machines, I usually don't stop until they are like factory new. Hopefully the pump will come tommorrow. I have a few loads of laundry to do tonight, I'll just have to use the A612!
Bobby in Boston
 
Bobby ... a lot of the parts are "hit and miss". You should try for the knobs and lid gasket; I think those are still available. I don't have a list compiled of what's still available and what's not. I wish I could get a "master" type list.

When you get a new lid gasket; don't get frustrated with it right away!! They are hard to put on. You need to heat it up first and stretch it. The best way is just to lay it in the hot summer sun for a couple of hours and then step on one end and pull up just past your waist and hold it there for a moment. It's a good exercise program!! :-) Then, put it on the lid fairly quickly while it is still elastic enough.

The repair manual suggests you run it in the Maytag dryer for a few minutes to get it good and warm so it becomes elastic. I have never tried that, but I'm going to order one too for my N and see if that works.
 
Both sound like good ideas to stretch the rubber, Geoff. Since it's ~95 degrees in the shade here, I'll try the sun trick, and hopefully it won't melt!
Bobby in Boston
 
Yippee!! It came today, an original pump that must have been laying around for decades, since it's all covered with dust. Many thanks to all of you, especially cehalstead for suggesting RepairClinic.com. No more playing with the Whirlpool or Norge. Back to the N2LP! More to come, hopefully with pics. LOL to all,
Bobby in Boston
 

Similar threads

A
Speed Queen wringer washer pump
Replies
5
Views
148
ragnboneman
R
thatwasherguy
WTB: G.E. Filter Flo pump
Replies
3
Views
212
cfz2882
C
brpeter
Maytag Wringer Washer Restoration
Replies
8
Views
281
bradross
bradross
M
Maytag N2L Wringer
Replies
1
Views
137
launderess
launderess
M
Maytag washer E2L vs N2L newbie help!
Replies
3
Views
222
ea56
ea56

Latest posts

Back
Top