MIB/ NIB Jenn Aire

[jetcone]

Mike

I'm gonna swap out the KDS-22 as that location is what I use when home alone. The other KA is used primarily for large gatherings. 
I am excited about the capacity of this machine and John I will read up on that "Conserva" wash. I don't know what that is about.

 

It just shines Louis, almost as if don't turn it on!! But a machine has to be used to have function.

 

 

[nmassman44]

Jon I think your going to like the Jenn Air dishwasher. The only thing I would do is look at the belt since they have a tendency to dry out and crack over time.

 

[chachp]

I liked my RR

<span style="font-family: verdana, geneva;">I had one for a couple of months some years back.  I picked it up for $25 at an Estate Sale.  It was in the home of a heavy smoker so it took some doing to get rid of the smell.  I cleaned it and sanded the top to get rid of some marks.</span>

 

<span style="font-family: verdana, geneva;">I especially liked the tines in the back left corner of the upper rack.  As mentioned by others they were curved to hold bowls upright and I really liked that they stood up straight and got the water from above and below.  In the back of the upper rack on both sides there were two sets of curved tines spaced further apart to hold larger shallow serving bowls.  </span>

 

<span style="font-family: verdana, geneva;">I didn't have it long enough to comment on how it stood up to daily use but for the short time I had it everything I threw at it came out very clean.  I have a tendency to throw some challenges to my dishwashers and this one seemed up for the challenge.  </span>

 

<span style="font-family: verdana, geneva;">I eventually read a Craigslist ad that tugged at my heart string and I gave it away.  They are times I wish I would have held on to it only because it was such a different design from all the others.</span>

 

[jetcone]

Mike

I already bought a new belt. I didn't think the original belt would be any good as it sat in the same position for 20 odd years so before I even start the machine it will get the new belt. 
I always thought it so weird that it also gets a coat of silicone over it too!! 

 

The only other machine I know that comes close to this treatment is the Kelvinator clutch has be kept lubed with vaseline otherwise the motor will stall.