Miele W3922WPS service

[dubstar85]

Cool!

I have had the 3922 for a year and its been perfect! This update sounds good! Don't suppose you know if it is a free service??

David

 

[samsungfl]

Sounds Amazing

The Updates sound fantastic! Our 3922's almost a year and a half old already, and I really do love it! I'm always really facinated at how my washer, my neighbours and Jon's have always worked in quite different ways, despite being the same model!

I think it shows Miele really do keep trying to get the best performance out of their machines with the varying programming! After hearing about these updates I really am thinking about having ours updated!, even if it does cost me, I think its really worth it personally!

Rich

 

[newwave1]

Hey David, as far as I'm aware you have to pay the call out charge if you want the update... however I'm not 100% sure so it's worth giving them a ring .

Jon

 

[newwave1]

lol if you hadnt noticed people jon hijacked my laptop but forgot to log in as himself

D

 

[dubstar85]

Hehe, thanks for letting me know. I'll give them a phone tomorrow. If i need to pay for it, it will be one of the many things that are going to get done after our wedding next year.

David

 

[lavamat_jon]

David - if you have MSN, add me via my address on my profile... will be able to tell you a few tricks you can do

Jon

 

[dubstar85]

Sounds intriguing! I'll do that!

David

 

[lavamat_jon]

Here's a pic of the machines =)

 

[lavamat_jon]

And a mugshot of the washer herself =)

 

[lavamat_jon]

And a video of teh new spin cycle.

Enjoy =)

Jon

 

[foraloysius]

Interesting update. Perhaps I should get my W715 updated...

Sounds like uncle Jonathan is stimulating interest in washing machines!

BTW, get an energy saving bulb, much better than a 100 Watts one. At least when the 100 Watts ones are still available.

 

[favorit]

Minimum Iron / Skippin' cycle steps

Hi guys,
my novotronic W844 five minutes before the M.I. cooldown switches from normal (or suds-reducing) cadence to wool cadence. Do you know what is that for ?

Jon, i'm curious about the W3922 .... I wonder if it's possible to "play" nearly like it had a mechanic timer, to skip cycle steps. Suppose you switch it to END while it's on cotton main wash. Does the rinse led flash then the spin one ?

I wish even domestic mieles were so flexible like the Little Giants. Check in the link to their manual how many changes one can operate by the setting/supervisor menu :-o

TIA
Carlo

http://www1.miele.de/gb/household/service/sa/manuals.aspx?product_type=PW 6065&type_instr=GA

 

[lavamat_jon]

Hi Carlo - ours just tumbles as normal on MI even thoughout the cooldown. However our short button is pretty much always permanently pressed in - oddly enough not in the picture I've taken lol - so I don't know if that affects things.

You can't skip cycle stages on our model - if you turn the dial to Stop it just cancels the cycle. However I've never really had any use for this, the cycles are fast enough when short is pressed

Jon

 

[foraloysius]

Carlo,

The slower tumbling in the cool down is for calming the suds down. If you use too much detergent you will notice the layer of foam will get thinner.

Louis

 

[favorit]

thanks Louis, wasn't sure about it, as it does such way even with no suds at all anyway.

Updating the W715 ... uhmm, it is the very first novotronic model.... definitely a milestone. I wish it were possible to keep a back up copy of the original programmes, so that one can choose anyway and have the "historical" record too

I'd hit my toes with a hammer after discovering the update aborted the good old cotton cooldown. I miss it on the W844, can have it @ 75 and 95°C only *LOL*