My New Range is HERE!

Automatic Washer - The world's coolest Washing Machines, Dryers and Dishwashers

Help Support :

For John (combo52)

John:

I found the answer on the aluminum burner bowls. This is from the 1966 P*7 Use & Care Guide that is downloadable from Automatic Ephemera, on Page 6, in the section beginning "Parts of the Range which may be cleaned during P*7 automatic cleaning." The underscore is added:

"b. Aluminum reflector pans found under surface units. Wipe off boilovers not stuck to pans. Place pans upside down on shelf at Position C. Some kinds of soil may require more than 2 hours to remove. See cleaning chart in Care Section for other ways of cleaning reflector pans. Also see heat settings on Surface Cooking Chart to prevent boilovers. Aluminum reflector pans cleaned automatically may soften and change in color. Replacements can be purchased, if desired from your GE dealer."

So, it seems the P*7 cleaning temp was known to have an effect on the pans. BTW, the P*7 Use and Care Guide covers the TOL 40-incher and the TOL 30-incher of 1966. The 30-incher shown is quite similar to the range I now own, so I got a trove of info that I can use until the frabjous day the exact manual for my range turns up. This makes about the fourth time that Automatic Ephemera has been able to supply a HTF manual, or something close to it, for a new vintage appliance in my house.
 
Thanks for the Heads-Up

I may go ahead and buy these burner bowls, even though I'd love to find a complete set of NOS ones. That will be a bit tricky for this range - it has two 6" burners and two 8" ones, one of which is the Sensi-Temp burner, which uses a unique burner bowl, not the same one ordinary 8" burners do.

I'm making all kinds of progress. I had a very kind PM from John L. (combo52) offering a photo of the "mystery" oven door hinge clips mentioned upthread. John and I had a great conversation, and he texted me two photos that cleared things up beautifully. John, I myself can't get those pics to post here; if you ever have time and inclination to share them here, I think they would be a valuable resource for the Archives.

The oven door hinge clips are intended to improve and tighten the fit of the door on the hinges, so it was important to me to get them back in properly, which they now are. Thanks, John!

I am working on details now. One of them is trying to find the clip John mentioned for the wires to the Sensi-Temp burner. He says it's the the right of the right-rear 6" burner bowl, and I cannot find it. As matters stand, the wires are laying atop the deflector for the oven vent, which cannot continue, because that area would get very hot during P*7 cleaning. If anyone can steer me in the right direction on the clip, I'd be grateful - I just can't find anything like that. Maybe it's a removable clip and it's missing, I dunno.

Anyway, she's getting a little better each work session, and I'm hoping to be able to test the oven this weekend. After that, she sits for her portrait!
 
Fully Operational!

Well, she passed an initial oven test - both her bake and broil elements work fine.

After that, she got put into P*7 mode - and she works! Results were not quiiiiite as sensational as I'd hoped for, but then I only ran a two-hour cycle. Every self-cleaner make and model has its own personality, and I will have to learn what this old girl likes and doesn't like.

Still, she made a valiant effort, which means that after forty-one years, she came to me with every single one of her features intact and working.

They truly do not make them like this any more!

Pictures soon. But not tonight - Sandy tired. There was a small matter of four loads of laundry to be washed and ironed in addition to Project P*7. Oy.

P.S.: Does anyone know the correct griddle that would have come with - or been available for - this 1972 model?[this post was last edited: 11/16/2013-18:52]
 
yes the outlet, the outlet...

I would never be able to use the timed outlet, in the kitchen, for an appliance, but it sure is sweet.

As for the drip pans in the P7.

An apartment I lived in, in 1989, built 1969, had an original avocado GE P7 oven. I remember the type written lease (It was 1987, lol)
The lease rules specifically said <span style="text-decoration: underline;">NOT TO PUT THE DRIP PANS IN THE OVEN </span>and explaining that the shiny finish would wear off.

 

Of course, I tried it anyway.  The pans for my stove, at this point, were pretty dull already.  I didn't know the magic that could be had with soaking and baking soda.

 
 
I use the timed outlet on my GE Spacemaker under-the-counter clock radio all the time.  I'd be lost without it.  It's not difficult to use, and it's great to wake up to freshly made coffee.  Nothing says home like hearing a percolator start up on a cold WI winter morning. 
 
Greg (luxflairguy)

Thanks for the link to the griddle.

I had seen it previously, but I don't know if that's the griddle that was available when the stove was new.

Does your linking me mean that you know this is the right one for a '72 model?

Thanks!
 
When I get some time free....

...and when you have avilable time, as you've already promised, I'm coming for meatloaf.

Sandy, it was such a pleasure meeting you and having the blessing of participating in your new stove acquisition. So glad to see it's working well and bringing such joy to your home. Nothing quite says home, like the aroma of fresh cooked food lofting through the air, prepared by skilled hands on equipment intended to produce quality outcomes. May you have many years of happiness with your 'new' stove.

John Mc
 
John (combo52):

Why don't we just figure out a parts order? What works best for you - AW private messaging or email?

I know I need -

- Knobs
- Trim rings
- Griddle
- Broiler pan

I can photograph the knobs for matching.

Let me know!
 
John (oldskool):

John:

It was a huge privilege meeting you!

The range has meant a remarkable improvement in quality of life. I now have coffee automatically in the morning - not a given for perc users like me. I now have light to cook by - the old range's cooktop was always dark. The self-cleaning means no more thinking, "I'd like so-and-so, but nah - I'm not wanting to do the clean-up." And the Sensi-Temp has already saved one boilover when a long-winded co-worker kept me on the phone long past the conversation's sell-by date - I had totally forgotten about soup on the burner. No harm done whatever.

And if you're using the P*7 cycle, you definitely don't need to run the furnace, LOL!
 

Similar threads

V
Settled on a new range!
Replies
8
Views
18
thatwasherguy
thatwasherguy
paulg
Admiral range 1958 questions
Replies
8
Views
9
paulg
paulg
D
Is this even possible to do without creating irreparable damage?
Replies
7
Views
9
combo52
combo52
N
Help identifying a GE 1954 push button stove 24"
Replies
1
Views
8
dangerboy
D
V
Looking at this stove to add to my kitchen
Replies
11
Views
13
vrusp1
V

Latest posts

Back
Top