New Kenmore 800

Automatic Washer - The world's coolest Washing Machines, Dryers and Dishwashers

Help Support :

The 800 is not yet on Kenmore's site, I saw it in a store. Whirlpool's model is listed on their site.

1. Traditional direct-drive/tranny toploader.

2. EnergyStar qualified.

3. Automatic water level. The 800 does not have a water level control at all (no manual selection). I can't say about the Whirlpool, there isn't a close-up of the panel.

4. Triple-spray fill flume integrated into the tub ring.

5. Separate control for Softener Added Yes/No, which changes the rinse.

6. The 800 has a Bulky cycle, which is something new for a DD toploader.
 
Other interesting items about the 2009 800 Series.
-You can no longer get a porcelain lid & top on either washer or dryer in 2009.
-Hardware being used (esp) knobs are of much less quality than I have ever seen in a Kenmore or Whirlpool product.
-800 Series does not offer any colors, but lower end line 700 Series offers a darker blue color.
-Sears/Whirlpool has also limited series to only 800,700,600, & 500, others have been dropped.
 
Jason-

your link shows the last of the 2008's 800 Series with a porcelain top, lid, and wash basket, (shown the 28847) is the last of it's kind, on clearance and is a deal!

The new 2009 800 Series will not hit Sears websites till after Thanksgiving.
 
I am not particularly a DD washer fan (I do respect them and recommend them when asked by friends what they should buy), but I LOVE those pacific blue machines. We just got a Sears outlet store that is right on my way home. During it's grand opening it had about 25 of those machines all lined up, back to back. Some had five water levels, some had the infinite switch, but either way they were awesome looking. Next to them in another huddle was the matching 27-inch dryer. If they'd had a 29-inch dryer, I'd have been hard pressed not to leave with a set (not sure what I'd do with it later, but I'd have bought it!).

The machines were priced well too, relatively, at less than $500.

I agree with Jason whole-heartedly, nothing beats the real thing.

Gordon
 
5. Separate control for Softener Added Yes/No, which changes

So am I correct in guessing this has a shower rinse system?

One hopes that the spin speed has been ramped up a little.

I wonder when these features will be made available across the rest of the Whirlpool line and when we will see them in Australia?
 
I see that Whirlpool has the same machine in their line. And I'm sure Maytag won't be far behind. You have to give Whirlpool some points for doing what will probably be neccessary to keep toploaders alive (or should I say legal) for a little while longer.

Ed
 
I saw the Kenmore 800 at Sears along with the Whirlpool version. It amazes me that they are claiming the washbasket capacity is 4.0 cu ft. Its the same size washbasket in the other Kenmore/Whirlpool Direct Drive machines. So if you think about it 3.2 cu ft is the new 4.0 cuft. I am curious at how the Auto Water level works. I will have to say i would love to get my mitts on that tub ring and put that in my Whirlpool.
 
AUTO LOAD DETECTION

The auto load detection system on the classic washer system has a control that will sense the load in a washing machine to provide the required amount of water during fill and rinse. This control will interface with a new flow meter, the current ATC combo switch, and the timer as required during a cycle. The new control will provide consumer benefits of new energy saving water options.The auto load detection control is the Fabric Softener Switch. If “Softener Added” is selected the unit will give a full sized fill in the rinse cycle. If “No Softener Added” is selected, the rinse fill will be measured.

This system will replace the current pressure switch. During the first fill, the water will enter to a low level, then agitate for 10 seconds. This is to assure that all of the clothing becomes saturated. The Load sensing control will analyze the adjusting information from the flow meter and the pressure sensor to then fill to a proper level. The second fill will fill by volume, measured by the flow meter. The Accessory Plug is a test point for the factory. All failures default to high water levels.

Source:

 
how interesting, reading the tech info says if it fails to measure the water level properly it will fill to its max with water interesting.....
 
Back
Top