Smart Grid Bottom
Is that like what you get when you sit in a wicker chair in a bathing suit?
Is that like what you get when you sit in a wicker chair in a bathing suit?
New Maytag top loaders!!!
- Thread starter mtn1584
- Start date
Help Support :
aldspinboy
Well-known member
Interesting nice new hole pattern in the wash basket.
I just don't like the wash plate belt drives..
models, the duel agitator belt drives are fine.
They say that Maytag models offer more heft to the package.
In the top of the line models are they still using TRUE
F & P Magnectic Direct Drive motors ..
The lock out feature really bothers me but
seems like UL got them on that issue..
Why not a 3 to 5 min open delay so you can
Check while its on button behind the control panel..
Lock out for normal consumers is making washday worse
for average people who do laundry.
Belt drive wash plates Gezzz.
I just don't like the wash plate belt drives..
models, the duel agitator belt drives are fine.
They say that Maytag models offer more heft to the package.
In the top of the line models are they still using TRUE
F & P Magnectic Direct Drive motors ..
The lock out feature really bothers me but
seems like UL got them on that issue..
Why not a 3 to 5 min open delay so you can
Check while its on button behind the control panel..
Lock out for normal consumers is making washday worse
for average people who do laundry.
Belt drive wash plates Gezzz.
wp-dude22
Well-known member
like the new drum on the wash plate models hate the new WP control panel looks better on the maytag ....
and honestly ... yall expected WP to do better i find that stainless steel drums should be standard now even on lower end washers ....
for me the lid should lock just before spin on models with manual water level control since there is no need to sense balance (no sensing spins) as the washer will redistribute during agitation
on models with auto load sense locking during sensing spins is essential as the washer uses the sensing spins to sense balance and load weight to estimate the load size before it goes into sensing stroke agitation to accurately sense the load
as for the agitators whirlpool could have did sum thing new and i hope water flow into the machine has been rectified i mean that water restriction sucks
motherboard should have new coding and the lock mechanism should have less issues / better design by now and i mean whirlpool could have also raised the spin speed on all base models to 900 RPMS instead of just cosmetic changes. i suspect that they also changed agitation profiles a bit (i think the washer should do more 90 degree wash strokes @ a higher speed in between the 180 degree long strokes heck maybe a 360 stroke in the mix). also hoped the quiet down the drain pumps and ship a longer drain hose.
and honestly ... yall expected WP to do better i find that stainless steel drums should be standard now even on lower end washers ....
for me the lid should lock just before spin on models with manual water level control since there is no need to sense balance (no sensing spins) as the washer will redistribute during agitation
on models with auto load sense locking during sensing spins is essential as the washer uses the sensing spins to sense balance and load weight to estimate the load size before it goes into sensing stroke agitation to accurately sense the load
as for the agitators whirlpool could have did sum thing new and i hope water flow into the machine has been rectified i mean that water restriction sucks
motherboard should have new coding and the lock mechanism should have less issues / better design by now and i mean whirlpool could have also raised the spin speed on all base models to 900 RPMS instead of just cosmetic changes. i suspect that they also changed agitation profiles a bit (i think the washer should do more 90 degree wash strokes @ a higher speed in between the 180 degree long strokes heck maybe a 360 stroke in the mix). also hoped the quiet down the drain pumps and ship a longer drain hose.
mrb627
Well-known member
Control Panel Knobs
I felt the control panel knobs on a current WP range offering and they are absolutely the flimsiest plastic EVER. I instantly ruled out WP/MT as a possible replacement for my kitchen renovation. Making GE the front runner at this point.
Malcolm
I felt the control panel knobs on a current WP range offering and they are absolutely the flimsiest plastic EVER. I instantly ruled out WP/MT as a possible replacement for my kitchen renovation. Making GE the front runner at this point.
Malcolm
pierreandreply4
Well-known member
when looking at the control panel
when i look at the control panel it looks like they are using the bravo control panel design
when i look at the control panel it looks like they are using the bravo control panel design
The top-loading Frigidaire Immersion Care is also belt drive. Guess it's more common than I thought. I figured all the impeller/wash plate machines would be direct drive. Wrong!
mrb627
Well-known member
Whirlpool's belt drive
Machines are too noisy. At least the HE models are. They should have stuck with the F&P design.
Malcolm
Machines are too noisy. At least the HE models are. They should have stuck with the F&P design.
Malcolm
washerdude
Well-known member
i like the way the new maytag looks. but it does have some ups and downs now....
Too heck with these new WP-Maytag things-I'll just buy a washer at the SWAP SHOP-the older ones!They have agitators--and fill up with WATER!These new machines are just crusher bait!!The hungry crushers are just out there waiting for 'em!
Basic model
I found this picture on the acces.whirlpool site. It's a model with only water level switch and temperature control. Just like in the old days. I bet though the rinse is a spray rinse (?).
I found this picture on the acces.whirlpool site. It's a model with only water level switch and temperature control. Just like in the old days. I bet though the rinse is a spray rinse (?).
pierreandreply4
Well-known member
seeing these new washer i can say that i would go huebsch
seeing these new whirlpool maytag agitator washer even do i use the inglis whirlpool brand since i was a child i would go with the canadien speed queen huebsch top load model zwn 432 or buy a vintage refurbish wsher dryer set like this set if i had to make a choice
seeing these new whirlpool maytag agitator washer even do i use the inglis whirlpool brand since i was a child i would go with the canadien speed queen huebsch top load model zwn 432 or buy a vintage refurbish wsher dryer set like this set if i had to make a choice
lightedcontrols
Well-known member
- Joined
- Sep 7, 2004
- Messages
- 1,549
I replace the boards in these machines continually. These machines are plagued with problems. I usually am called to service them at about 1 year and a month old. Just out of warranty. More Whirlpool junk
washerdude
Well-known member
What model is this? I really think they should make that unit.
Similar threads
