New Old Stock Montgomery Ward Dishwasher Sandusky, OH $30

[datalady]

Seller says this has never been used.

Log into Facebook

Log into Facebook to start sharing and connecting with your friends, family, and people you know.

www.facebook.com

 

[combo52]

New WCI Built DW

This is one NIB appliance I would not brother even hooking up, would make a great museum piece for an 80s kitchen.

 

John L.

 

[repairguy]

For reference:

 

[rp2813]

Judging from the lettering . . .

. . .  a surviving relic (only because it has never been plugged in) from the haunted and eternally cursed area last known as "Electric Avenue."

 

[bajaespuma]

Is this a Westinghouse?

 

[peteski50]

Wards!

Yes this is wci

 

[appnut]

Thank you Melvin for taking the time to provide the photos.

 

[repairguy]

No problem Bob.

 

[tomturbomatic]

The poor thing.

 

[rpms]

The styling of it reminds me very much of the Beaumark appliances sold by The Bay department store here in Canada in the early 90's. Were these dishwashers cheaply made or just did not work well? Looks like it could hold a decent amount of dishes.

 

[turquoisedude]

Baycrest appliances from The Bay pre-1978 would have been closer to this.  The Beaumark appliances were sourced from Camco, so the dishwasher from 1979 forward were Hotpoint clones.  

 

 

[gansky1]

 

 

Years ago, I pulled one like this from a friend's rental property, complaints of not cleaning and leaks.  The ridge of the tank that the lower rack rides on was riddled with rust holes.  A BOL plastic-tub Hotpoint was a welcome sight for the tenant. 

 

[whitetub]

To reply to Turquoisedude, I would say that the Viking dishwashers at Eaton's were exactly like this WCI dishwasher. My aunt had one with the same slanted control panel, probably made in the 80's. Here is a picture, but this advertisement is probably from the late 70's.

 

[bradfordwhite]

Judging by that heavy rope and this dock-side location they were actively looking for boat anchors.

 

[jetcone]

HAHAHAHH

Very funny Bradford !

 

[jdmorrisw]

Missionary needs a part

Hi. My wife and I are missionaries in southern Mexico, 1000 miles south of McAllen, TX. Many years ago I bought a Montgomery Ward dishwasher at the border and transported to our home. It has worked all these years but is now leaking out the pump shaft seal. How could I get a new pump or seal for this old dishwasher? I can't get a new one here and it is too hard to bring a new dishwasher in now. I have friends at the border who can receive the part, cross the border and ship it to me. The specs are:
Montgomery Ward Dishwasher
Model UC01236C87
Serial SLB64094
Motor 6 amp
Other 6.1 amp
Connected load 12.1 amp
115v 60hz 1PH

 

[rinso]

IIRC, the first Montgomery Ward built-in dishwasher was made by Waste King. My aunt had one and I could tell it was a stripped-down version of the Waste King, as it lacked a pre-wash and automatic detergent dispenser.

 

[combo52]

Leaking wards dishwasher

This is a late 70s early 80s WCI product if you can send a picture of the pump assembly I can see if we still have one, very likely no longer available from Frigidaire the current owner of that product

 

[steved]

WCI

This is a WCI-built machine based on the old Westinghouse dishwasher design. I’m betting there are some parts out there.