Not Spinning Properly

[cleanteamofny]

There maybe a glitch in the cycle software, in your manual there maybe a way to reset the machine to factory defaults.
Then do installation setup if applied.
Give this a try and see if this clear the problem!

 

[tomdawg]

Whirlpool duet

I have the wfw97heduo, I'm having the same problem, only mine is not reaching above 400rpm did you guys figure out the problem?

 

[washerdude]

Should've probably posted this a loooong time ago:

I fixed this issue by removing the top and pressing in firmly at the wire that comes out of the stator and goes into the computer along with the rest. Our duet is now a little over 2 years old and the problem has not returned. I notice on the quick wash cycle, if the load is off balance, it stops at an earlier part of the spin due to this being a "quick" cycle and it can ramp down quicker.

 

[washerdude]

Should add

I pressed in firmly at BOTH ENDS of the wire.

 

[washerdude]

Also should add...

*UNPLUG BEFORE ATTEMPTING*