chlorinedreams
Active member
YW Erik
It is possible that it is the tub seal weeping that will cause that....
It's possible that it's leaking from the gasket...
A good way to check gearbox edge is to set it to spin cycle, then blip the lid switch (just enough for motor to elevate gearbox) then you can easily rotate it counterclockwise and inspect all gasket surface and bolt tensions.
Rotating clockwise will lower gearbox into brake assembly
It is possible that it is the tub seal weeping that will cause that....
It's possible that it's leaking from the gasket...
A good way to check gearbox edge is to set it to spin cycle, then blip the lid switch (just enough for motor to elevate gearbox) then you can easily rotate it counterclockwise and inspect all gasket surface and bolt tensions.
Rotating clockwise will lower gearbox into brake assembly