Orbital Maytag Videos

Automatic Washer - The world's coolest Washing Machines, Dryers and Dishwashers

Help Support :

Thanks to Westytoploader and others, I did the same conversion to my Maytag, and wouldn't switch back for anything...the clothes are cleaner, have less lint on them and rinse better. Besides that, the machine is much more fun to watch....anyone need a good used Load Sensor agitator? I will never use it again......
I have some video, too, but I can't figure out how to get it here.
 
YAY ! ! ! ! !

Thanks for sharing the videos Westy. That was FUN. Now how is the agitator that was on the machine before different from this one? What kind of agitator was it? <p> This got me to thinking about the next DVD from Robert. I know everyone had voted on and it had been decided which machine the next dvd would have on it. I have not missed it, have I? I am guessing that as much as I check out the sight, I have not missed it. BUT I want to be sure. Robert you haven't released the next dvd yet have you ?
 
Hi Tom,

The original agitator was a LoadSensor (Maytag's DA clone), and believe it or not, it rolled the clothes nowhere near as well as this one. The Power-Fin combined with the Orbital transmission is EXCELLENT; very fun and cleans like there is no tomorrow. I haven't thrown anything in there with stains the Power-Fin could not remove.

I forgot to mention that the fast, short strokes really improve the lint filtering ability as well.

--Austin
 
Strokes

Its just as fast as my whirlpool dd strokes also just like our whirlpool the tub moves durring agitation
 
The Maytag and Whirlpool tubs are not supposed to index; this one indexes ever so slightly on large loads (usually it does not move at all); I guess because more pressure is put on the brake because of the large-base agitator. Oh well...when the problem gets worse I'll go ahead & replace the clutch assembly...it currently works fine now and brings the tub to a smooth, quick stop.

I think another problem is the speed at which the tub brakes. If it brakes from a full 618 RPM spin (I've watched both Orbital and Helical Drive and haven't noticed any differences between the speeds), the brake tends to hold stronger than if you lift the lid when the tub is still getting up to speed. Although since I can defeat the lidswitch, I can watch the entire cycle without any interruptions.
 
Westy:

I got to hand it to you, being a front load man. I had a dd maytag machine, with the Power flex, (widen fins near the base)agitor. If i had known that it could have been replace with the power fin---I'd probably still have it today. Great clips.
 
Good videos Austin! I've never tried this with an orbital Maytag, it looks like it could really make some lint if things are washed too long! The indexing of the tub is called a "sympathetic index" and won't hurt it at all. My 906 with a 50hz motor pulley does the same thing.
 
My 1951 GE has sympathetic wash tub indexing. No DVD yet, I'm still working on it. I have both cycles filmed, I just need to put it all together and get the disks made. Hopefully soon.
 
Slow or Gentel

Hi Austin:

Is the Machine on gentle or slow speed during the wash? It sounds and looks to be slower than that of your video of the low water agitation with no clothes in it?

Steve
 
I didn't think you could use a powerfin agitator in a orbital Maytag -- isn't it hard on the transmission? I'd like to put one in mine but I'd like to be sure it's ok.
 
The machine is running on regular speed during wash...gentle speed is noticeably slower.

Since the Maytag Dependable Care transmission has the rotating transmission driven by the Helical Drive like the old design, I'm not worried about damage to it, and so far there is none evident. I've been doing 12-14 loads per week in the machine since December and it's working great!

I wouldn't try a large-base KA agitator in DD WP/KM transmissions, however, as they're a far cry from their BD counterparts and much cheaper, IMHO.
 
Free and will ship

Austin:

Do you know of any one on here who needs the Turquiose agitators? I have a plethera of them That is how i decorate my garage!!!

LOL anyway, email me and let me know!

Steve
 
hard on transmission ?

Maytagfan has a good point. The orbital transmission is not designed to handle the resistance of the Power Fin agitator.
Understand that Maytag does not manufacture the old counterweight transmission anymore. The orbital can be installed in any helical drive machine. Maytag makes it very clear that when you replace the old style with an orbital that you must order the "kit" which includes the transmission and new agitator.
 
COMMITING POWERFIN SIN?

I think not. Here's why,the Powerfin has four FLEXIBLE fins,and with their give and take, plus the fact that they are just at the bottom, there should be little load and drag (almost sounds aerodynamic with this lingo, doesn't it?)Thus,the whole sha-bang should hold up fine.
 
flexible fins

Not sure how much the fins would flex (give) with the high occilation rate and short stroke of the orbital transmission. I myself have never worked on a machine with the "wrong" combination. I just always remember when Maytag phased into the orbital (1989) going to a factory tech school and being told that the old agitator had too much drag resistance for the new trans. The plastic gears in the orbital do wear out. (I have changed my share of them.)
It may take a long time for it to do the damage. I'm just saying I wouldn't do it to my machine.

ED
 

Similar threads

ryner1988
Got my replacement dishwasher yesterday, GE model #GDT225SSLS
Replies
7
Views
16
ryner1988
ryner1988
N
'91 Maytag A8740 Orbital Trans with Stuck Agitator Shaft
Replies
6
Views
14
good-shepherd
G
hosertp
Maytag A512 02 Spins but Won't Agitate
2 3
Replies
52
Views
53
robbinsandmyers
robbinsandmyers
ryner1988
I think I'm going to finally buy a front loading washer and I have many questions
2
Replies
24
Views
60
spookiness
S
L
Orbital transmission oil & MT Dep Care rebuild
Replies
2
Views
13
qsd-dan
qsd-dan

Latest posts

Back
Top