Ouch! ...and more...Ouch!!

[supremewhirlpol]

More parts and things for anyone who wants them. Posting everything may take a while as I recover from my dentist visit. For now this Bosch machine has to go.

 

[supremewhirlpol]

I have the manual, and was told that it was 3-4years old. IT needs a motor control unit, but seeing how poorly designed is part is and the $250 price for it, I just can't justify spending such money on a machine. It is a NEXXT series machine.

 

[supremewhirlpol]

Obviously, by the picture this machine needs...help.
M/N:WFMC3200UC
This machine is first available to who comes to get it. If no one wants the machine whole, I will remove certain parts for people, as long as they can be shipped in small boxes. If the part is something big like the door, outer tub, or cabinet, you have to collect in person.

IF you are interested in anything, PLEASE SEND EMAIL. Those who post interest about items to this thread WILL NOT BE TAKEN SERIOUSLY!

I have other things, such as FSP hoses, old sytle GE profile pumps->may take a while to post those.

 

[aamassther]

supremewhirpool, please email me re: if you are going to part this machine out. Unfortunately, your email is unaccessible. Thank you! Todd

 

[supremewhirlpol]

my email is under my profile.

 

[aamassther]

supremewhirlpool, checked there first. But you have selected "supremewhirlpol does not wish to display their email address" where your email address is in your profile.
Thank you! T

 

[supremewhirlpol]

Todd:
You check your email?

 

[3beltwesty]

Maybe one could convert it to a paint mixer?

Maybe not too

 

[aamassther]

supremewhirlpool, I apologise, not trying to be difficult. I've changed my profile so that you may email me. Thank you! Todd

 

[supremewhirlpol]

Todd:
OK, I'm going to send you an email one more time. If this don't work, I give up.

***I WILL NOW ENTERTAIN PARTS REQUESTS***

 

[aamassther]

Got it! Thank you, sent you an email reply. T

 

[supremewhirlpol]

Water and dispenser valves-> these fit Kenmore 90 Series DD washers with triple dispenser system. Last time I checked, these valves were kinda expensive.

 

[supremewhirlpol]

1 speed GE profile motor and clutch

 

[supremewhirlpol]

Calypso motor

 

[supremewhirlpol]

Kenmore 90 series DD dispenser connectors w/ hoses

 

[supremewhirlpol]

pump for GE washer

 

[supremewhirlpol]

Ge Dryer heating element isolators

 

[supremewhirlpol]

GE washer Inverter motor

 

[supremewhirlpol]

various hoses (FSP)

 

[supremewhirlpol]

Calypso outer tub insulation

 

[supremewhirlpol]

calypso shaft/pulley

 

[supremewhirlpol]

calypso shocks

 

[supremewhirlpol]

calypso nutator

 

[supremewhirlpol]

LG-built GE Spacemaker washer motor/lower electrical

 

[supremewhirlpol]

GE FF agitator cap

 

[supremewhirlpol]

More GE profile pumps

 

[supremewhirlpol]

GE profile 2 speed motor

 

[tolivac]

the washer in the "3beltwesty" video sounds like another Bosch tool----A rotary hammer drill.I hope that machine is not an example of the ones being built out my way in New Bern,NC-the factory WAS a former Bosch power tool factory.A little hammer drill ancestry snuck into that washer?Bosch power tool division of Bosch was bought out by Skil-Emerson tools-also Dremel is under tht label-along with Roto-Zip tools.

 

[combo52]

SHOP CLEANING

Melvin it is always good to due a little cleaning. The tub insulation blanket from the Calypso can be used on almost any washer to make it quieter and hold in heat, also the GE washer drain pumps can be adapted to all kinds of older washers where you can't get the original pumps.

 

[supremewhirlpol]

John:
That's a good idea for the tub insulation. Maybe I should hold on to 2 of these pumps.

I really hate to throw away things that work...so wasteful.