Parts for a 1954 Frigidaire Imperial Cycla-Matic

[58limited]

Hi, I'm new to the discussion group. I have a 1954 Frigidaire Imperial Cycla-Matic refrigerator (model #CTI-103) that is missing several parts: vegetable drawers, all shelves for the "Pantry Door," the ice tray shelves in the freezer, and the sliding utility tray that hangs under the freezer. It basically looks like the fridge was stripped of everything except the main shelves and was used for beer storage in the barn of the farm I bought it at. If anyone knows of a parts source for vintage refrigerators, I would appreciate the info. Thanks, David.

 

[gyrafoam]

I have some old refrigerator parts I will be going through----hopefully sometime soon. Will need to figure out the parts numbers so will be a tedious job. Bear with me and maybe I will find some of the things you need. I too, have a couple to restore but much older so I sympathize!

 

[58limited]

Thanks. I can post some scans from advertizing and the owner's manual if that will help with identifying parts.

 

[58limited]

color ad

Here is a scan from a color ad. Mine is "seafoam" green on the inside.

 

[58limited]

owner's manual

Scan from owner's manual - shows egg shelves behind the serving tray. I have the serving tray but a corner is broken off. I would like to replace it with an unbroken one. All of the door shelves are missing except for the permanently attached butter and cheese units. If anyone runs across a parts donor, please let me know.

 

[goatfarmer]

There's a j-yard about an hour from me that some of those old Frigidaires in it.Probably be a month or so before I get back there,but I'll check for you.

kennyGF

 

[58limited]

Thanks, Kenny. I figure this is probably an almost impossible quest, but I've had luck with ultra rare car parts in the past. Thank goodness for the internet! David

 

[goatfarmer]

Have you tried here? They were able to help me with a drawer for a 1940 Gibson I have.

kennyGF

http://www.antiqueappliances.com/index.htm

 

[58limited]

Yes, I tried them, no luck with the parts I need.