Primus w-10X^2

[supremewhirlpol]

:ROGRESS UPDATE::

The drum is in!! Yesterday I reinstalled and centered the cylinder drum assembly. Next is finding and installing the motor.

 

[hotpoint95622]

lees project

My program is still developing and still has problems, with the board I made, now designing a new board with a different micro controller on it.

 

[supremewhirlpol]

Lee:
I have not gotten to the programming part yet. I'm slowly still gathering parts. I'm also looking into a few other machines to start on(that machine or machines are still a secret). Parts can sure be expensive!! Especially industrial/commercial control modules and special 3 phase motors. Have you tried any PLC modules?

 

[hotpoint95622]

lees project

I’m strictly domestic and most of the parts are from scrap machines with exception to the motor which is new and cost over £100. Saving for a new PIC programmer which costs about £60 so I can try using bigger micro controller, which will have more options and hold bigger program, then going to try and etch a PCB. I have lost count how much I have spent so far.

 

[supremewhirlpol]

I lost count when I spent $100 on an Allen Bradley SLC500 DEVICENET Scanner module for the user interface screen. The total that I have spent on this project so far has to be over $500.