Well the Kelvinator is completed, I ran six wash loads through it and it performed like a champ. I decided to re-engineer the fabric softener dispenser so it does not get all clogged and yucky again. I wanted to make sure it gets flushed with every rinse. So what I did was to take a new early 60’s Whirlpool Combo water valve and install it in the Kelvinator. The Whirlpool Combo water valve has a special nozzle and third solenoid to provide flushing water to its detergent dispenser.
So I wired the third solenoid directly into the fabric softener dispenser circuit and I ran a copper tube from the special nozzle all the way up into the dispenser and yay for clean dispensers!
So I wired the third solenoid directly into the fabric softener dispenser circuit and I ran a copper tube from the special nozzle all the way up into the dispenser and yay for clean dispensers!
