I need specific advice for a laundry problem and hope that you folks might have a solution.
I am a caregiver for an older relative who suffers from mild urinary incontinence. For various reasons, "Depends" and similar products are not an option. This means that I have to wash an item or two a day that have been wet, and of course it needs to be done promptly.
Up till now I've been washing in a standard upright with low water settings etc. on short cycles. Our local utilities have just raised both the electric and water rates by a large margin, and I need to explore options.
I'm old enough to remember wringer washers (and my nostalgic relatives approve of them) but I have no practical experience with them so I am asking for advice:
1) Factoring out the first cost of purchasing the machine, is there enough savings in terms of electricity, water, and detergent to make buying a wringer washer a sensible purchase? Keep in mind, one load a day, one or two garments, very light soiling, very short wash cycles.
2) Because this is going to be used as a working appliance and not a show piece, what specific make and model should I consider? I was thinking of a late model (1970's) Maytag. Personally, I like Maytag Automatics, and the Wringers look to be well constructed and (most important) plentiful with spares available.
4) What features should I look for? (drain pump etc.)
5) I live in a well-preserved 1910 home with full basement. I am planning to put in a laundry room downstairs and space is not a consideration. I'd like the Wringer to have a semi-permanent set up (i.e., the machine is meant to be used at one station and not wheeled around the room) The washer's relationship to the laundry tub and filling arrangement is of particular interest. If anybody has a picture of that kind of set up, or suggestions, I'd love to hear them.
Thanks,
Bill
I am a caregiver for an older relative who suffers from mild urinary incontinence. For various reasons, "Depends" and similar products are not an option. This means that I have to wash an item or two a day that have been wet, and of course it needs to be done promptly.
Up till now I've been washing in a standard upright with low water settings etc. on short cycles. Our local utilities have just raised both the electric and water rates by a large margin, and I need to explore options.
I'm old enough to remember wringer washers (and my nostalgic relatives approve of them) but I have no practical experience with them so I am asking for advice:
1) Factoring out the first cost of purchasing the machine, is there enough savings in terms of electricity, water, and detergent to make buying a wringer washer a sensible purchase? Keep in mind, one load a day, one or two garments, very light soiling, very short wash cycles.
2) Because this is going to be used as a working appliance and not a show piece, what specific make and model should I consider? I was thinking of a late model (1970's) Maytag. Personally, I like Maytag Automatics, and the Wringers look to be well constructed and (most important) plentiful with spares available.
4) What features should I look for? (drain pump etc.)
5) I live in a well-preserved 1910 home with full basement. I am planning to put in a laundry room downstairs and space is not a consideration. I'd like the Wringer to have a semi-permanent set up (i.e., the machine is meant to be used at one station and not wheeled around the room) The washer's relationship to the laundry tub and filling arrangement is of particular interest. If anybody has a picture of that kind of set up, or suggestions, I'd love to hear them.
Thanks,
Bill