Servis super twin service

Automatic Washer - The world's coolest Washing Machines, Dryers and Dishwashers

Help Support AutomaticWasher.org:

It will need a little bonding of silicone

When the pumps were manufactured the seals were often pressed into the housing of the pump and the tight thresholds between the seal and the housing achieve a good seal . However as the housing is worn and there would have been some corrosion it won’t achieve a reliable union between the two components so you will need a little silicone to bond the two together . There will be water passing behind the seal and into the oil port . …. Good luck but an EASY QUICK fix . Darren
 
Oh yeah, by the way what could I use to help the pump engage

To the transmission drive pulley? As it’s no good if there’s a sealed pump but the pump doesn’t spin, and I did notice the shaft does spin freely so I’m not sure if that is the steel spinning inside of the house thing or if the shaft itself is spinning But I’ll definitely drag it out of the bathroom to take the pump off and I’ll wait for your responses if that silicone can be used, as I do want to try and use the original pump, but I have already devised a method if after trying everything so it would be possible to electrify it As I had to change all the original drain hose stuff inside the machine and sorry electrifying the pump isn’t gonna be that much of an issue if worse comes to worse
 
The silicone will be fine

Just be aware that the recess where the seal sits needs to be really clean . If you have a dremel clean it up with the mini sanding drum. If the impeller / shaft won’t spin make sure that the impeller blades are not catching on the body of the pump … if you have made a new gasket be aware that the blades can catch on a gasket that’s has excess material in its way This may help . Darren
 
Back
Top