SERVIS Supertwin 108 question

[whispermatic]

Does anyone know if the drain hose for the Supertwin 108 is common to the 100 or 110 models?
I need to replace it on mine but it seems only those versions are available.
Thank you.
JR

 

[vacbear58]

Supertwin

Do you mean the spin drain hose or the wash tub drain. If its the spinner drain then I doubt you would get a replacement rubber hose but any sort of generic drain hose, with the added benefit of a jubilee clip should be fine.

If it is the wash tub drain, Mike or Mathew might have one in their parts stash

Al

 

[whispermatic]

Hi Al, Thanks for your reply. It's the spin tub drain hose - the hooked one that exits from the bottom rear of the machine.

 

[vacbear58]

You should be good to go with any generic drain hose then - the pumps on these are quite strong so if it suits you to have a longer than original hose you should be fine.

Al

 

[whispermatic]

Hi Al, Sorry probably I didn't ask the question very well - I have found hoses for both the 110 and the 100 in a spares shop in Liverpool - I just wondered if either are common to the type used on the 108 as I would rather use a rubber one than a generic type if possible.
Thanks, JR

 

[sesteve]

Hi JR

The hose for the 100 should fit. The 108 needs the tight bend on the outlet in the pump to exit the machine and the 100 hose has this. Here's a pic I nicked from a spares website of the 100 hose.

S

 

[whispermatic]

Thanks, Steve.
The -100one is on it's way to me now!