sharp51482
New member
I have tried to find and ordered a few without success; a dump seal for my Kitchen Aid KUDS220T3 dishwasher. The old one has become soft and deformed and started leaking in a few spots. Any help would be appreciated! Thank you.
Sump seal for kuds22?
- Thread starter sharp51482
- Start date
Help Support :
KitchenAid 18 through 22 series sump gaskets
Can’t really tell by looking how bad yours is, we still have lots of good used ones around.
If you clean yours up and let it dry you can just glue it into the sump using three M marine sealant and you shouldn’t have any leaks.
John
Can’t really tell by looking how bad yours is, we still have lots of good used ones around.
If you clean yours up and let it dry you can just glue it into the sump using three M marine sealant and you shouldn’t have any leaks.
John
sharp51482
New member
Pump gasket condition
I’ve taken some close-up photos of the seal after cleaning it up.
He will notice there is a cupping around the upper edge.
I’m wondering if I should seek a new seal before attempting to
Use the 3M marine seal… I’m curious as what might cause this
Type of damage to the gasket… Would anyone have an opinion?
On whether this gasket should be reused with the 3M sealant?
Thank you,
I’ve taken some close-up photos of the seal after cleaning it up.
He will notice there is a cupping around the upper edge.
I’m wondering if I should seek a new seal before attempting to
Use the 3M marine seal… I’m curious as what might cause this
Type of damage to the gasket… Would anyone have an opinion?
On whether this gasket should be reused with the 3M sealant?
Thank you,
Your old seal looks pretty good. I'm not sure why the edges curl like that, but it seems to happen frequently as the age if the rubber is still pretty soft, you shouldn't have any trouble using that one.
John
John
