As an eBay Associate we earn from qualifying purchases.
unusual Hoover Top loader washer in UK
- Thread starter ricky5050
- Start date
Help Support :
richukbristol
Well-known member
- Joined
- Jun 24, 2008
- Messages
- 245
Hi Richard it's a haxis washer and if I remember correctly it was made by Zanussi and had the hoover badge but on it.
Rich
Rich
matchboxpaul
Well-known member
Thank god its visually a bit of a disaster.....
cause otherwise it would cause me to be more stressed than i already am (what with the subject of another thread in this forum!).
This machine is the Hoover A1094 Topline and was introduced circa 1980, as the toploader offering as part of the 'Smoother Hoover' series of machines - A3108/10/12/14/66 & 70.
Unusual machine and have never seen one before, apart from in brochures. A rare machine.
Paul
cause otherwise it would cause me to be more stressed than i already am (what with the subject of another thread in this forum!).
This machine is the Hoover A1094 Topline and was introduced circa 1980, as the toploader offering as part of the 'Smoother Hoover' series of machines - A3108/10/12/14/66 & 70.
Unusual machine and have never seen one before, apart from in brochures. A rare machine.
Paul
hotpoint95622
Well-known member
hotpoint 95622
Just up the road from me, about 50 miles. I think I would be shot if any more machines find there way into the garage.
Just up the road from me, about 50 miles. I think I would be shot if any more machines find there way into the garage.
electron1100
Well-known member
hmm
kin ell!........from the A3110 range........sh*t i like that, an as Richard (the AEG has to go soon by the way
...) says being a Zanussi it will be good.........drat why cant it be down ere..........
SAVE IT!......PAUL you have three spaces left i beleive.........now that would take your mind off PLYMOUTH! woudnt it
kin ell!........from the A3110 range........sh*t i like that, an as Richard (the AEG has to go soon by the way
...) says being a Zanussi it will be good.........drat why cant it be down ere..........SAVE IT!......PAUL you have three spaces left i beleive
.........now that would take your mind off PLYMOUTH! woudnt it
electron1100
Well-known member
miles an miles
Telford is bloody miles away about 250 for me from ere.........drat
Telford is bloody miles away about 250 for me from ere.........drat
robliverpool
Well-known member
deffo not seen one like this before
I see that it is sold
Anyone from here get it?
Al
Anyone from here get it?
Al
Yup
I m sure the Spa of neil can rustle up a quick spray jobby!!!
I m sure the Spa of neil can rustle up a quick spray jobby!!!
electron1100
Well-known member
Fek Me its an 18 INCHER!
glad i didnt win it, can honestly say it seems a bit cheap and nasty to me, though i can see you would enjoy it Mike
glad i didnt win it, can honestly say it seems a bit cheap and nasty to me, though i can see you would enjoy it Mike
Great stuff Mike
Another rarity saved. Is this your first H Axis washer?
Al
Another rarity saved. Is this your first H Axis washer?
Al
vivalalavatrice
Well-known member
- Joined
- Dec 22, 2005
- Messages
- 1,031
EVVIVA!
A carica dall'alto!
That's what I mean when I say "a carica dall'alto" which means top loading!
It's very similar to my latest acquisition, the Castor C488A in the picture below
www.automaticwasher.org
A carica dall'alto!
That's what I mean when I say "a carica dall'alto" which means top loading!
It's very similar to my latest acquisition, the Castor C488A in the picture below
Castor C488A - Any EuroTL lovers near here!?
Hi all, This is what thanks to a friend I found out to save from end. The machine went out without the pulley and the timer was smoking! The drum flaps didn't close correctly and the tube was awfully stinking! The cabinet was in the worst condition I ever seen before and probably the machine...
www.automaticwasher.org
Hoover : maybe outsourced from Brandt rather than Zanussi
Compare Diomede's Castor (discontinued Zanussi brand) with the Hoover.
Drain pump lids are in opposite sides, also handles of top lids are different
Also compare these 2 AEG toploaders (AEG has never had its own toploader production line)
The Lavamat 565 (left) is a Zanussi make, while the Lavamat 86 is no doubt a Brandt machine, cause the combo (Lavamat 2086) has the same design and the very only manufacturer that has ever made toploading combos is Brandt
[sorry for the low quality shot]
Compare Diomede's Castor (discontinued Zanussi brand) with the Hoover.
Drain pump lids are in opposite sides, also handles of top lids are different
Also compare these 2 AEG toploaders (AEG has never had its own toploader production line)
The Lavamat 565 (left) is a Zanussi make, while the Lavamat 86 is no doubt a Brandt machine, cause the combo (Lavamat 2086) has the same design and the very only manufacturer that has ever made toploading combos is Brandt
[sorry for the low quality shot]
I also think this Hoover was made by Brandt rather than Zanussi. I remember that the italian Sangiorgio (Brandt group) was just like this hoover. And if you look closer, inside the opening (print ad) you can see two colored compartments (blu & jellow) one for the softener and one for the bleach. Brandt machines were made like this. I don't remember any Zanussi washer made this way.
Anyway, nice find!
Ingemar
Anyway, nice find!
Ingemar
vivalalavatrice
Well-known member
- Joined
- Dec 22, 2005
- Messages
- 1,031
Intreresting the 565
has got a leftside filter porthole!
Yes, my Castor seems real a Zanussi like it isnt' the Hoover... which is more similar to a Sangiorgio... you're right
has got a leftside filter porthole!
Yes, my Castor seems real a Zanussi like it isnt' the Hoover... which is more similar to a Sangiorgio... you're right
Hoovers
Update guys is the Oovvaaa has been delivered to the "Spa of Neil" whereupon I was phoned by the paintsprayer manager who uttered a long list of expletives along the lines of "A little paint job!!! you`ve gorra be fexxxxx kiddin me" ....so I took that as he was fine with it!!! lol
From the photos in the brochure, the laminate worktop and metal surround is missing but am sure we can fix that along with the paint jobby
Diomede, yes it does look very similar, especially the top although as you say the pump is opposite sides.
Al, I had a Phillips Whirlpool toploader in 1993, 1100 spin the one with the dark grey flip up control panel, vario time temp & spin, had it in a small hallway cupboard with phillips D153 dryer above it, fab combination!!!
Bertrum, yes pics have been taken, the paintshop manager wants "All" the world to know just what had to be done..!!
Gorenje & Favorit, the label says "Made in France" so I guess that its a Brandt etc...will take some inside pics this weekend and post!!
Update guys is the Oovvaaa has been delivered to the "Spa of Neil" whereupon I was phoned by the paintsprayer manager who uttered a long list of expletives along the lines of "A little paint job!!! you`ve gorra be fexxxxx kiddin me" ....so I took that as he was fine with it!!! lol
From the photos in the brochure, the laminate worktop and metal surround is missing but am sure we can fix that along with the paint jobby
Diomede, yes it does look very similar, especially the top although as you say the pump is opposite sides.
Al, I had a Phillips Whirlpool toploader in 1993, 1100 spin the one with the dark grey flip up control panel, vario time temp & spin, had it in a small hallway cupboard with phillips D153 dryer above it, fab combination!!!
Bertrum, yes pics have been taken, the paintshop manager wants "All" the world to know just what had to be done..!!
Gorenje & Favorit, the label says "Made in France" so I guess that its a Brandt etc...will take some inside pics this weekend and post!!
electron1100
Well-known member
Spa of Neil
Well from what i have seen of his work before it will look brilliant, WONT IT MIKE
Well from what i have seen of his work before it will look brilliant, WONT IT MIKE
