There is currently not a lot of info out on the new LG Top Loader with Agitator model WT7305CV or the WT7305CW in regards to how TurboWash 3d functions.
Before I bought the unit, I was under the impression that the Turbo Wash 3D feature, has a feature that makes the wash water spin to the top of the unit and then be powerfully sprayed back over the load.
I believe LG describes this feature as "A powerful jet spray in the wash cycle".
On bestbuy.com, homedepot.com, & americanfreight.com; they all have the following statement in the "features" section..
------- Start Quote.
TurboWash3D™ Technology
A powerful jet spray in the wash cycle, plus the tub and motor that rotate independently and in opposite directions, creates a powerful water flow that combines with the 4-way agitator for enhanced washing performance.
------- End Quote.
I have observed the Turbo Wash Cycle several times, but I've haven't seen "a powerful jet spray in the wash cycle".
I have seen the SmartRinse™ jet spray system that forces water to penetrate through and into the close as the tub spins for quick and thorough rinsing.
But I don't believe the SmartRinse feature is the same feature that is talked about when they mention the "powerful jet spray in the wash cycle".
Here is video of the WT7305CV with the Cycle Selector Knob turned to "Normal" and Turbo Wash enabled. The wash cycle starts at 01:48. At 12:28 & at 16:47 you can see that the load will start spinning in the middle of the wash cycle, but no "powerful jet spay" starts.
You can see an example of the SmartRinse function working at 24:53, 25:35, and at 26:12.
So doesn't some sort of powerful spray similar to SmartRinse suppose to take place during the wash cycle?
Full Timeline of Video.
00:03 - Loading the Washer.
00:22 - Closing the SlamProof™ Glass Lid.
00:30 - Still Shot of the Settings.
00:34 - Start of Cycle Signal Chime Sound & Door lock engaging.
00:37 - Auto Sensing / Loadsense.
01:48 - Wash Cycle - 1st water added to tub, Detergent is also auto dispensed.
03:55 - Wash Cycle - Water stops and the tubs spins.
04:14 - Wash Cycle - 2nd water addition to tub.
04:23 - Wash Cycle - Water stops and the tubs spins.
05:15 - Wash Cycle - 3rd water addition to tub.
05:35 - Wash Cycle - Start TurboDrum™ & Agitator with 6Motion™.
09:55 - Wash Cycle - Stop wash motions.
09:57 - Wash Cycle - 4th water addition to tub.
10:08 - Wash Cycle - Start TurboDrum™ & Agitator with 6Motion™.
12:16 - Wash Cycle - Stop wash motions.
12:28 - Wash Cycle - Start Load spin counter-clockwise.
13:18 - Wash Cycle - Stop Load spin counter-clockwise.
13:26 - Wash Cycle - Start TurboDrum™ & Agitator with 6Motion™.
14:28 - Wash Cycle - Stop wash motions.
14:29 - Wash Cycle - 5th water addition to tub.
14:35 - Wash Cycle - Start TurboDrum™ & Agitator with 6Motion™.
16:45 - Wash Cycle - Stop wash motions.
16:47 - Wash Cycle - Start Load spin clockwise.
17:43 - Wash Cycle - Stop Load spin clockwise.
17:52 - Wash Cycle - Start TurboDrum™ & Agitator with 6Motion™.
19:24 - Wash Cycle - Stop wash motions.
19:26 - Drain Cycle - Drain Pump turns on to drain tub.
20:15 - Drain Cycle - Spin starts while drain pump is still active.
24:02 - Drain Cycle - Spin stops. but drain pump still active.
24:10 - SmartRinse™ Cycle - Spin starts while draining.
24:36 - SmartRinse™ Cycle - Water added while spinning & draining.
24:53 - SmartRinse™ Cycle - Water added via Jet Spray System nozzles while spinning & draining.
25:20 - SmartRinse™ Cycle - Water added while spinning & draining.
25:35 - SmartRinse™ Cycle - Water added via Jet Spray System nozzles while spinning & draining.
25:57 - SmartRinse™ Cycle - Water added while spinning & draining.
26:12 - SmartRinse™ Cycle - Water added via Jet Spray System nozzles while spinning & draining.
26:48 - Spin Cycle Starts
37:36 - Spin Cycle Ends
37:43 - End of Cycle Signal Chime
Before I bought the unit, I was under the impression that the Turbo Wash 3D feature, has a feature that makes the wash water spin to the top of the unit and then be powerfully sprayed back over the load.
I believe LG describes this feature as "A powerful jet spray in the wash cycle".
On bestbuy.com, homedepot.com, & americanfreight.com; they all have the following statement in the "features" section..
------- Start Quote.
TurboWash3D™ Technology
A powerful jet spray in the wash cycle, plus the tub and motor that rotate independently and in opposite directions, creates a powerful water flow that combines with the 4-way agitator for enhanced washing performance.
------- End Quote.
I have observed the Turbo Wash Cycle several times, but I've haven't seen "a powerful jet spray in the wash cycle".
I have seen the SmartRinse™ jet spray system that forces water to penetrate through and into the close as the tub spins for quick and thorough rinsing.
But I don't believe the SmartRinse feature is the same feature that is talked about when they mention the "powerful jet spray in the wash cycle".
Here is video of the WT7305CV with the Cycle Selector Knob turned to "Normal" and Turbo Wash enabled. The wash cycle starts at 01:48. At 12:28 & at 16:47 you can see that the load will start spinning in the middle of the wash cycle, but no "powerful jet spay" starts.
You can see an example of the SmartRinse function working at 24:53, 25:35, and at 26:12.
So doesn't some sort of powerful spray similar to SmartRinse suppose to take place during the wash cycle?
Full Timeline of Video.
00:03 - Loading the Washer.
00:22 - Closing the SlamProof™ Glass Lid.
00:30 - Still Shot of the Settings.
00:34 - Start of Cycle Signal Chime Sound & Door lock engaging.
00:37 - Auto Sensing / Loadsense.
01:48 - Wash Cycle - 1st water added to tub, Detergent is also auto dispensed.
03:55 - Wash Cycle - Water stops and the tubs spins.
04:14 - Wash Cycle - 2nd water addition to tub.
04:23 - Wash Cycle - Water stops and the tubs spins.
05:15 - Wash Cycle - 3rd water addition to tub.
05:35 - Wash Cycle - Start TurboDrum™ & Agitator with 6Motion™.
09:55 - Wash Cycle - Stop wash motions.
09:57 - Wash Cycle - 4th water addition to tub.
10:08 - Wash Cycle - Start TurboDrum™ & Agitator with 6Motion™.
12:16 - Wash Cycle - Stop wash motions.
12:28 - Wash Cycle - Start Load spin counter-clockwise.
13:18 - Wash Cycle - Stop Load spin counter-clockwise.
13:26 - Wash Cycle - Start TurboDrum™ & Agitator with 6Motion™.
14:28 - Wash Cycle - Stop wash motions.
14:29 - Wash Cycle - 5th water addition to tub.
14:35 - Wash Cycle - Start TurboDrum™ & Agitator with 6Motion™.
16:45 - Wash Cycle - Stop wash motions.
16:47 - Wash Cycle - Start Load spin clockwise.
17:43 - Wash Cycle - Stop Load spin clockwise.
17:52 - Wash Cycle - Start TurboDrum™ & Agitator with 6Motion™.
19:24 - Wash Cycle - Stop wash motions.
19:26 - Drain Cycle - Drain Pump turns on to drain tub.
20:15 - Drain Cycle - Spin starts while drain pump is still active.
24:02 - Drain Cycle - Spin stops. but drain pump still active.
24:10 - SmartRinse™ Cycle - Spin starts while draining.
24:36 - SmartRinse™ Cycle - Water added while spinning & draining.
24:53 - SmartRinse™ Cycle - Water added via Jet Spray System nozzles while spinning & draining.
25:20 - SmartRinse™ Cycle - Water added while spinning & draining.
25:35 - SmartRinse™ Cycle - Water added via Jet Spray System nozzles while spinning & draining.
25:57 - SmartRinse™ Cycle - Water added while spinning & draining.
26:12 - SmartRinse™ Cycle - Water added via Jet Spray System nozzles while spinning & draining.
26:48 - Spin Cycle Starts
37:36 - Spin Cycle Ends
37:43 - End of Cycle Signal Chime