Wanted: Maytag Neptune Motor Control Board

[moparwash]

This board goes in the hard plastic case, the serial number of the machine is 4686227424..anyone got one?

Jerry

 

[ovrphil]

Jerry - if something works out with someone here at aw.org, great - otherwise, I checked ebay - and found this : $69 buy it now price...but w/o the part number...this might not be helpful at all.

Pardon Our Interruption...

 

[yogitunes]

that one is a mother board, located inside the control panel.....

this is a motor control board, found in the lower right hand bottom of the machine....it should look like this, but there are a few different ones with different plugs...

Jerry, whats the part number on your motor control board?....

 

[super32]

Be specific. If i remember right there were a few different ones. 2 i remember off the top of my head. They are not interchangeable.

 

[moparwash]

Long story short the place is fixing the neptune  took the old board to order the new one ...I am looking for a spare one to have for the future...Ill post a pic of the plugs

 

[yogitunes]

Scott's correct...there are several for the 5500 series alone....I should know, different motors as well.....

the only way most were interchangeable was to change the motor and board together, almost as a matched set...

although I was always partial to the "revved up" jet sound of the 3000/4000 series motor....a very quiet machine until the final spin, THAT got everyones attention!

video courtesy of our own Eddy1210

 

[moparwash]

Its for the stack unit if that narrows it down

 

[ovrphil]

Reply#5

Outstanding jet whine! Jet - Screaming cool.

 

[repair-man]

The machine control board that is pictured in reply #1 is not a good board. You can see the famous R11 is burnt out. The door won't lock so the machine will not spin. Someone is trying to sell a bad board for $69.

 

[redcarpetdrew]

Agreed!

That board is toast. As a fellow seller, I sent a courtesy message to him as he honestly may not know. Lord knows I've seen a few of those shot R-11's in my time...

That board is from a Neptune Super Stack. He also has a valid board listed that would be a great item for all you MAH4000 owners as long as it's as good as it looks and currently at a very reasonable price...

RCD

Pardon Our Interruption...

 

[ovrphil]

Bad Board

repair-man - I'm GLAD I posted the wrong board - maybe someone will see this thread and think twice....always impressed by what you and others can spot right off.

Hope that moparwash can get the needed part, reasonably.

I'm done.

 

[redcarpetdrew]

The seller messages me back and thanked me for the heads up. He said he looked closer and saw the R-11 burned and removed the listing. So all ended well...

RCD

 

[ovrphil]

RCD - great stuff to hear...good man.