We didn't need a new dryer, but....

Automatic Washer - The world's coolest Washing Machines, Dryers and Dishwashers

Help Support :

perc-o-prince

Well-known member
Joined
Oct 23, 2005
Messages
5,199
Location
Southboro, Mass
Rich saw this down at the transfer station (dump) Saturday, and couldn't resist it! Ron was here and the three of us went back down in Rich's dad's pickup to get it. Hooked it up a little later, and found out it works just fine! Looks like we might be missing a small panel at the bottom though. Anyone know for sure?

No kidding... we didn't have it in the truck 3 minutes before the bucket-loader came by to crush everything into a pile!!!

Here's Ron and I taking out the "old" one (1973-ish Kenmore)

Chuck

4-16-2007-15-04-0--perc-o-prince.jpg
 
Oh you have to love the way that beauty lights up. Great find guys, I am wondering if it is just a little chrome strip that is missing?
 
lint?

I just did my first regular load witgh the GE and noticed that there was a lot of lint stuck to the porcelain right and left of the lint trap. So, when pulling clothes out, you have to drag them through the lint, unless you wipe the opening with a paper towel first.

Is this normal??

Thanks in advance if you have any ideas!
Chuck
 
Hey Chuck,

Make sure the vent hose is clean and as short and straight(?) as possible. Also check the inside of the door, where all the holes are. The opening at the bottom of the inside of the door can accumulate lint. There is sometimes a piece of cardboard stuck to the inside of the inner door. Make sure it is laying flat against the front panel of the door, and not in the way of the opening at the bottom of the door. Also make sure the vent holes on the inside of the door (and the door itself) are cleaned of lint. Let me know. Hope I've helped!!
 

Latest posts

Back
Top