Recent content by shankstr

correction Correction, Cross shaft goes from the transmission to wringer shaft. Sorry, It's been a couple years since I've had to work on one and going off memory. :)

Late to the party Snail, glad you figured it out. The reason you wouldn't want to lay it down is because there is a breather vent hole on the top of the cross shaft that goes from the agitator to the wringer.If you run your finger along the top you will feel the hole. 60 year old gear lube...

Late to the party I'm a bit late to this thread but wanted to know how your E2L rehab turned out? I have rebuilt 2 Maytag wringers, a E2LP & J2LP and use them both frequently. I'm kinda hit and miss on checking the posts here. Seems I get preoccupied with other projects. I'm glad Larry, Stan...

Welcome to the club Hi Cindy, Sounds like you are enjoying your new found pastime. I have a model J and E and like you have learned alot from other members here. So much so that I have re-built the transmissions (which basically means "cleaned out"), lubed, oiled, painted and polished both...

So Has anyone tried contacting this guy? Maybe he will part with the agitator only, if it will come off?!?! Also, I believe Tomturbomatic is correct about the conventional agitator not fitting the automatics. I think there is a post height difference and or spline difference? Steve

Hi all saw this on CR. I know a lot of you would like to have one of these agitators. I already have one and really like it. It's located in Millstadt, IL which very close to St. Louis. Steve http://stlouis.craigslist.org/atq/3682105652.html

I found one of these in good shape for sale and I'm trying to decide if I should go look / get it?? I know they don't come around too often and I already have the E and J...

I know many of you would like to get your hands on this agitator!! http://elmira.craigslist.org/app/3467593660.html

Larry Yes, I did get a new centerplate from Phil but that was for my E2L which I added the the pump So it's a E2LP now! I've had it up and running for a month now and works great. I never did post any completed pics of though. This centerplate is for a J2L I picked up and am adding a pump to...

Fred I curious to know and hope you don't mind me asking. How much were you asking for your E2LPS?

Larry Funny that you responded first. I almost shot you an email to give me a call. I figured since you have pulled yours apart more times than you wished that you would have the answer. I was having the same problem with the parts list. I guess they didn't make exploded diagrams back then...

Ok, I goofed up. I have forgotten where the spring washer goes on the centerplate shaft. I thought it went between the clutch pinion collar and centerplate?? The problem I'm having is the agitator shaft is engaged all the time regardless of the shift lever position. Any thoughts of wisdom...

parts contact Try Phil for parts he's a good guy. Philip Hornyak - [email protected]

pump parts arrived but I am having to repaint the skirt for a 3rd time so I am not ready to put it all together yet. I tried the rustoleum appliance spray and it worked great on the wringer, cap and post but the skirt is not to my liking so I am going to try the roller method Stan suggested. I...

Roller bearings They made 2 different size wringer rollers.. a standard and oversize. The A4326 roller bearing would be for the standard size and the other for the oversize roller. I can't help on how to determine what size roller you have as I don't know what the standard vs. oversize...