Search results

Looks Good, and Normal>> Hey again,   For its age, not bad...don't worry too much about that collar/lock ring. If it doesn't turn after taking the screw out, then use a Hammer and Sharp Chisel. Breaks right into on about the third lick. Made to do that anyway.   Tranny diagram, part#'s...

Well, not that I could afford to buy from them... But they had a nice catalog...reminiscent of Sears...let you dream.   Oh well, Survival of the Fittest I suppose, LaVidaBoem...

What a Foul Mouth "Damp Back">> Hey Ortaygiie...   What's up with the Foul Mouth from Hell??   When you drop in LA, why don't you come to 'here' for a while... Me a few Jew Boys, and a Couple of Brothers would like to check your NGK washers...   Give you a Free adjustment.   Hugs &...

Hall Effect/Motor Signal Well, Hot 'Dern It...   It sounds like to me that the proper signal for a steady Sine/Cosine was is not reaching the MCB...Especially if not reaching a higher speed under Diagnostics.   The board won't send a full tilt "go", thinking its unbalanced.   Depending on...

Yes, it will work,.. It may require a little more tension, but don't overdo it...the pump bearings are not that strong.   Take some medium grit sandpaper (150-180), and polish the pulley "vees" on each side of motor and pump, trying to leave a good cross hatch pattern...(XXXX).   Will give...

Sounds Great... And to give her a real cleaning, use 2 tbsp of cascade on the tub clean after the initial dump of the clean water.   Then fill up to about 1/3 of window with hot (manual if need be),...it shouldn't dump...and then let it scour the drum/tub during the highspeed clean.   After...

NLA>> Hey Mark, Means No Longer Available, Eddy

Them 500 dollar "Jobs" Hey again...   Yes, its such a shame that nobody likes to really "earn" their money...they want to make a "lick" on every customer.   My going rate for the bearing/seal job, and only that is 200 bucks...and takes 45 minutes to 1 hour. I clear 1 bill, and that's...

Your 2¢ gets my vote... Hello, +One on your extrapolation of GE/Hotpoint. Now.   I hate to knock so many things...but those GE/Hotpoint things are not that great "here" either. Last 2 to 4 years on average before all you mention, and then tranny, clutches, motors...   I am not fond of low...

I don't have an opinion of additives... Morning,   I know the thinking that the softer the water, no need for further surfactants to clean clothes...wrong. I will never buy that...   Sure, you may one of the ones, that with lightly soiled clothes , only body oils etc, that you don't need a...

Robbin>> Dear Sir,...   That's why that Maytag is coming unglued, piece by piece... You're a VW kind-of-guy??   A Maytag needs total commitment, total love, and undying-unrequited Love.!   Either get rid of the VW rattler, or tell the Maytag you "wish you could"... Everything will be as...

Update: Oil Rises, Market Gains Gas $1.59 "here" I-85 corridor from Atlanta to Greenville to Charlotte.   Oil gained the past couple days...Up in aftermarket trading now @ 37.74 up .24³   Market had regained over 400 points since last Thursday/Friday Sell off.   Hummm.   LaVidaBoem  ...

OK, MCB and Control Panel Programmer I hope some others with newer Duets/Maytags will chime in, and see if indeed there machines are as you describe yours.   If I didn't know better, (and I don't), it would seem to me that yours was never running as I described, ramping up and then going full...

6 day old News, but... To Wallstreet and investors as of Monday of this week, GE announced that it is still actively seeking a suitor for the appliance division.   Sad, but True,   LaVidaBoem...

Ok, let's see... I'll go ahead and post some pointers.   >>Anything that will cause a drag on the spin/drum/cycle can cause this problem; not draining, a garment that has slipped over the edge and is caught between inner/outer drum...any piece or object of washer itself, and finally the...

That's Great... Nothing like when everything runs like it should...   I thought I would mention, as I don't remember in the thread, but that start capacitor for the Maytags...here is what is in the book for those models:   >>In some installations with low voltage, the washer motor will hum...

Well shucks partner... I'll do...   Post Script: I'll send you a few pics of the feast tonight, a la Southern Style... A Roasted Bird with all "the fixin's"... Let you see how us common folk eat...!

Well, Hot 'Dern It... I can't stand things like that... I do well on EPray, but I will tell you, it happens to all of us.   I have bought 3 dishwasher racks for my Kenmore Ultrawash with the part # from Sears crossed over, and got 3 different ones over the last so many months...finally bit...

Well, you didn't help her much. Hello, These machines in Maytag or Whirlpool badging are my #1 repair, sales, and service.   The best models are the ones with the agitator...over the impeller, and either can be adapted to work with the same control panel, and motor controller.   Looking at...

Norgeway>>Super Looking Cake... Man, I think we got the cooking on the East Coast down pat!   "label off a RedBand flour..." I miss some of recipes off of labels...they rotated often, and gave one a chance to accumulate lots of different items.   BTW, that 7 min icing is exactly the same...