Search results

Another http://atlanta.craigslist.org/atl/app/4333380580.html

Video coming soon!

This was the hardware I used. I bent the washer 1/4" so it would lay flat on the glass.

Then I took it all back apart and ran a bead of ultra blue around the windows and tightened up all the bolts.

Rack not installed but it slides out just fine now.

Cut off the part I won't be using anyway!

Well this is a problem! The top rack hits what to do?

drilled them out

Traced the holes

I had to move the detergent dispenser to the side so I cut out the hole pattern to use as a template.

Here's the outide

Its a piece of aluminum 1 1/2" angle and a 1" aluminum flat stock. This is what it looks like from the inside

This was my method for doing the trim, measure twice cut once! It worked well

2

Front door Cover

Action Shot!!

I had to cut the notch so the glass would make a good seal due to a contour in the door, that's also why it off-center. I can fix all that with the trim

Now the front door

No turning back now!

I cut the side for the light first. Just traced the glass and made it a bit smaller. I chose to use and angle grinder then just filed the sharp edges.