Search results

Thanks guys, I was trying to avoid buying the whole assembly, I thought just the plastic piece alone would be cheaper but I may not be able to find just that. The one in the link looks different than the one I have, the hole for the pin is more at the top than mine which is in the middle, not...

Anybody know where I can get a comparable rubber boot for a Kenmore Washer Leveling Foot? The metal feet are ok but the rubber is no good. I've searched a bit but can't find anything similar. Thanks

James, I'm actually doing a gearcase overhall too, for the first time on a 1971 Kenmore, so it was good to see your pictures. I was wondering how you got the retainer ring back on the agitator shaft after you installed the new spring and seal. With the new spring it's very hard to push it...

I'm rebuilding a gearcase on a 1971 Kenmore washer and wasn't sure if the main drive pulley needs to be removed in order to get the gearcase cover off. I've already removed the set screw, but was wondering if the pulley needs to come off. If it does, what's the best way to remove it? I really...

Replacing Capacitor on Central A/C Unit Yogitunes, I plan to re-place the capacitor on my Central A/C within the next few weeks. It's about 12 years old and I heard that it's best to replace them every 5 years or so, since they typically only last that long. I just want to be pro-active and...

Pic #4

Pic #3

Weber grill refurbishing Pic #2

I recently refurbished my 12 year old Weber Grill. Took it all apart, sanded the exterior and repainted with Rustoleum High Heat spray paint(exterior only) and replaced some parts. Total cost was about $80. It was a lot of work but I hope it will last another 12 years. Anyone who knows WEBER...

pic4

pic3

pic 2

This is my first washer restore (from @1970), so I have a few questions. First, I had some issues taking off the agitator, but some of you guys helped out on the forum and I got it off. Everything else came apart ok for the most part. All the rubber seals will be changed. I have a few...

I was wondering what some of you guys do when you need to replace an internal rubber hose in a washer that is no longer made by the manufacturer. It seems that some of the hoses are preformed (bent) a certain way to fit the location. An example of what I mean is in the picture below. Do you...

Thanks all for your assistance. Maybe I'll host an agitator removal party and have a few of my friends try to help me lift it out. Of course I won't tell them this until they get here, they may not show up!!!!!!!

I know this topic has probably been covered before, but anyone have any hints to remove the agitator on this Kenmore washer, it's from 1970? How hard do I try to pull it up without breaking anything?, Won't that pull up on the agitator shaft which probably wouldn't be a good idea? I tried to...

I want to convert a Kenmore Dryer power cord from 3 wire to 4 wire since I have a four prong outlet. Currently, on the machine the neutral grounding wire (green) is connected to the external grounding screw, and the other end is attached to the center terminal block screw. When attaching the...

I have this Kenmore Dryer (Model 110.7108801) that I took apart and cleaned/restored with new parts where necesary. I never tried it first before I received it since I don't have a 30AMP outlet in my garage where I did all the work, so I don't know whether it worked or not. Does anyone know...

Pic 3 Pic 3

Pic 2 Pic 2