Search results

Thanks for the input Bob. I'd you are referring to the filters that you can remove from inside the DW we have done that and made sure they were clean. are there any other filters I should be aware of that are under the tub?

Machine is approx. five to six yrs old. It's developed the habit of getting clogged. You can hear the motor running and during drain it tries to start but can't pump out the water. Check bottom of machine for any debris but it's clear. Checked drain hose and it seems to be clear. Any...

I have that model....just a little older We have that model DW. We've had it for a few years. We have the portable. It's performance is OK as far as I'm concerned. Yes, the machine does hold quite a bit. I could easily pass a Bob Load certification if I were to go for it (I don't mean to pat...

the scrubber cap (the part with the letter K) of the agitator screws off. Grab a hold of the trunk of the agitator and than unscrew the scrubber cap. The remainder of the agitator lifts off.

I wonder what kind of wash action came out of that washarm? With all those holes it makes you wonder and what kind of pressure did it generate.

Not sure if this is still the case but--------- Back in the 80's had the pleasure of going to Hawaii for vacation. While there, noticed at the majority of hotels and tourist accommodations that had w/d setups were outdoors. Whether it was in a open air garage or in a walkway somewhere around...

there may be just a hint of blue near the hot air intact inside the drum. I don't see an ounce of wear on any of the touch pads on either the washer or dryer in those pics. That's unusual for machines that are that age

At that price that machine isn't going to be going anywhere soon!

would love to see a few videos of your new toy in action. That was definitely a great find!

If you are opening and closing the lid while the machine is attempting to drain you are causing the machine to prematurely go into spin before all the water has drained out of the tub. This can cause the machine to slosh the load to one side while trying to go into spin. Leave the machine alone...

The link you posted has been deleted

My partner and I had the unfortunate situation of dealing with a broken dryer for several wks so off to the local laundromat to do the laundry. Besides the multitude of different sized front loaders they also had several top loaders which were these Maytag's you are referring to. I chose to do...

fabric softener If you use liquid fabric softener in your towels that will extend your drying time.

Coldspot66- Thanks for the advice on the belt installation. My partner will probably tackle the job tomorrow. We've been out taking care of other things and it took the entire afternoon. I think we be pooped! hahaha Will let you know how it turns out. Let's keep our fingers crossed...

oops almost forgot---- the dryer was made somewhere in the early 90's the model # is FDGB23RGS1 serial # is XD03914409

Quick question for those that are in the know- When replacing the belt in a dryer which side of the belt wraps around the motor pulley and drum? Is it the flat side of the belt or the grooved side? We just want to be sure. The belt snapped on the dryer about two weeks ago and we have to...

one word says it all FAB-U-LOUS!!! Hey Kevin- I am in awe of what you have managed to put together to bring CAVALCADE to life. I never realized that your collection was as extensive as it is. I'm amazed by the shape and condition you've managed to get everything to. I wish you all the best in...

Is that a thumb wheel control just to the right of center on the control panel? If yes, what was its purpose?

too bad there isn't more pics of the washer. I've never seen a Kenmore with that style of console on it that was a washer.

assembly & transporting The machine comes apart that way to make installation easier allegedly. I imagine it would also make transporting the unit easier to handle as well.