Well, thanks to Robert for giving me a wonderful lead on this, I finally have a Norge Timeline! Cabinet in decent shape, a little rust around the rim of the cabinet around the tub and thankfully the machine was kept indoors all these years. Lots of oil leakage from underneath so suspect a transmission failure of some kind. For fun, I plugged it in and it buzzes during the fill cycle but I cannot advance the timeline dial. Not sure if I should lube it up with Liquid Wrench, etc. So for now, this will be another “retirement” project along with my 1954 Frigidaire.
I hauled the machine in the back of my truck for about three hours, and in the middle of the trip, stopped for gas. Despite the fact I had duct-taped the lid shut, to my horror, the tape had come off and the lid was in the “up” position. It seems now the lid hinge(s) is bent and the lid won’t fully close as you can see in one of the pics.. Hopefully that will be an easy fix.
Am very excited about this project and many thanks to Robert for leading me to this awesome treasure!!


I hauled the machine in the back of my truck for about three hours, and in the middle of the trip, stopped for gas. Despite the fact I had duct-taped the lid shut, to my horror, the tape had come off and the lid was in the “up” position. It seems now the lid hinge(s) is bent and the lid won’t fully close as you can see in one of the pics.. Hopefully that will be an easy fix.
Am very excited about this project and many thanks to Robert for leading me to this awesome treasure!!

