50's Kenmore Cycla-Fabric
- Thread starter weejy
- Start date
Help Support :
70series
Well-known member
I believe this is a later 50s model Kenmore known as a frogeye. I'm sure somebody on this board would love to have them.
Good Luck,
James
Good Luck,
James
70series
Well-known member
By the way, welcome to the club.
James
James
Yeah, side opening lid means later 50's model most times. What is the model number?
Does it have a Roto-Swirl?
Frog-Eyes are such good old classics are you sure you want to get rid of it?
Does it have a Roto-Swirl?
Frog-Eyes are such good old classics are you sure you want to get rid of it?
Hi,
The lid is hinged at the back.
Model 110.553583
I don't know the history of this machine - I'm afraid to plug it in. I'm not that handy with appliances, and don't see myself attempting to resurrect it.
I DO think it's a cool piece of retro machinery that's too cute to scrap.
I also have a Crosley Shelvador fridge('30's vintage) if you know of anyone looking.
Thanks
The lid is hinged at the back.
Model 110.553583
I don't know the history of this machine - I'm afraid to plug it in. I'm not that handy with appliances, and don't see myself attempting to resurrect it.
I DO think it's a cool piece of retro machinery that's too cute to scrap.
I also have a Crosley Shelvador fridge('30's vintage) if you know of anyone looking.
Thanks
Yeah, its a '55 and really looks nice.
Does the agitator move freely? If so, it may be just fine. .
It may have some very noisy belts because of sitting so long, you can tilt the machine over and spray them with automotive belt-dressing.
Check to be sure pump is working and there are no leaks in the hoses before you try to run it with a full tub of water!
Also observe whether or not the timer advances.
Set the water level to "LOW" and the water temp on "HOT" and set the cycle selector to "Fill". Then let just a gallon or so water in (to prime the pump) and shut it down. Check for leaks. Then start it back up and advance the timer until agitation begins. If all is well, turn off machine advance timer to the end of the rinse cycle and see if she drains. If so, let her advance into the final spin on her own and see if that goes well. If so, you have a good machine.
If at any time the machine seems to get "locked-up" or is "binding". just shut her down.
Anxious to hear how she does! Some Meguire's Cleaner/Wax on this baby would really make her look good!
Does the agitator move freely? If so, it may be just fine. .
It may have some very noisy belts because of sitting so long, you can tilt the machine over and spray them with automotive belt-dressing.
Check to be sure pump is working and there are no leaks in the hoses before you try to run it with a full tub of water!
Also observe whether or not the timer advances.
Set the water level to "LOW" and the water temp on "HOT" and set the cycle selector to "Fill". Then let just a gallon or so water in (to prime the pump) and shut it down. Check for leaks. Then start it back up and advance the timer until agitation begins. If all is well, turn off machine advance timer to the end of the rinse cycle and see if she drains. If so, let her advance into the final spin on her own and see if that goes well. If so, you have a good machine.
If at any time the machine seems to get "locked-up" or is "binding". just shut her down.
Anxious to hear how she does! Some Meguire's Cleaner/Wax on this baby would really make her look good!
Testing.
I was always taught to set the timer to spin first and test that. No water required.
Dave
I was always taught to set the timer to spin first and test that. No water required.
Dave
70series
Well-known member
Just wondering:
If you run the machine on spin, and let it go through the spray rinses, would that be a good way to test the tranny as well as the pump without getting stuck with a tub of water? I figure if you position the drain hose in a bucket or sink, you will be able to see water empty out each time it rinses thereby proving that both functions work before testing the washing ability.
Have a good one,
James
If you run the machine on spin, and let it go through the spray rinses, would that be a good way to test the tranny as well as the pump without getting stuck with a tub of water? I figure if you position the drain hose in a bucket or sink, you will be able to see water empty out each time it rinses thereby proving that both functions work before testing the washing ability.
Have a good one,
James
Kenmore!
What a awsome washer. I like the back opening lid anyway, they should have kept that design. I hope the washer works.
Best Of Luck
Peter
What a awsome washer. I like the back opening lid anyway, they should have kept that design. I hope the washer works.
Best Of Luck
Peter
Neat!
That machine is exactly the model i saved from a NJ basement last winter. Its nice to be able to see what it would look like if it were in as nice shape as this one is!
If i was a little closer, I'd take it in heartbeat.
That machine is exactly the model i saved from a NJ basement last winter. Its nice to be able to see what it would look like if it were in as nice shape as this one is!
If i was a little closer, I'd take it in heartbeat.
danelto
Well-known member
I WOULDN'T PLUG IT IN IF I WERE YOU!!!!!
I think you're very wise NOT to plug that machine in.
You never know what could possible happen. Fire. Explosion. Flood.
I heard of an elderly couple who plugged in an old machine, just like the one you have. They were friends of my aunt.
The old lady lifted the lid, looked in, and got hit in the head with the lint filter. She got knocked out, but the husband died trying to give her CPR.
What you should do--right now--without further delay--is sell that dangerous piece of metal before something terrible happens.
In fact, I'll help you. I'll take that danger right off your hands. I've got a truck, and I can make it to Vermont.
How much do you want for it?
Dan
P.S. If a guy named Graham contacts you, he doesn't need any more machines.
I think you're very wise NOT to plug that machine in.
You never know what could possible happen. Fire. Explosion. Flood.
I heard of an elderly couple who plugged in an old machine, just like the one you have. They were friends of my aunt.
The old lady lifted the lid, looked in, and got hit in the head with the lint filter. She got knocked out, but the husband died trying to give her CPR.
What you should do--right now--without further delay--is sell that dangerous piece of metal before something terrible happens.
In fact, I'll help you. I'll take that danger right off your hands. I've got a truck, and I can make it to Vermont.
How much do you want for it?
Dan
P.S. If a guy named Graham contacts you, he doesn't need any more machines.
Fear, Uncertainty and Doubt
Wow! Thanks Dan, I'll just slowly step back from the machine...
Lint filter in the head? - ouch, what a way to go.
I'll remember that story the next time she asks "Would it kill ya to do a wash once in a while?"
Seriously, thanks to everyone for the advice on testing it out.
I'll poke around and see what happens.
Wow! Thanks Dan, I'll just slowly step back from the machine...
Lint filter in the head? - ouch, what a way to go.
I'll remember that story the next time she asks "Would it kill ya to do a wash once in a while?"
Seriously, thanks to everyone for the advice on testing it out.
I'll poke around and see what happens.
I was always taught to set the timer to spin first and test that. No water required.
You always want to prime the pump with hot water before you start the motor. This way if the seals are really dry they wont be destoryed when you start the machine up, the water will act as lubrication and well prevent you from causing a problem that wasn't there when the machine was put out of service.
You always want to prime the pump with hot water before you start the motor. This way if the seals are really dry they wont be destoryed when you start the machine up, the water will act as lubrication and well prevent you from causing a problem that wasn't there when the machine was put out of service.
Thanks
Thanks Robert. In the future I'll dump in some hot water and let it sit for some time before draining and spinning. The last thing I want to do is damage a machine due to my own oversight.
Thanks a bunch,
Dave
Thanks Robert. In the future I'll dump in some hot water and let it sit for some time before draining and spinning. The last thing I want to do is damage a machine due to my own oversight.
Thanks a bunch,
Dave
