hilal_1993
New member
- Joined
- Oct 2, 2014
- Messages
- 2
Just bought this beauty for free nearby, from an old man which has owned the washer since new, the washer is in very good condition,for it age with no unusual noises, and drum bearings sounds like new.
This washer is a dual 230V/400V machine, there is a box at the back of the washer were the mains cable go in, which shows how to wire it to either 230V or 400V configuration, if you use it in 400V mode, the heater output wil be at 3050W, on 230V the heater output wil be reduced to 2100W.
in Picture 10, the machine is in 400V configuration this is what the previous owner has used it in, 2 year ago when i did not have a dryer, there was a 400V outlet were the washer is, but when i bought the dryer i needed 2 outlets so an electrican changed that to 2X 230V outlets, so i wil need remove the black cable which makes it 400V from the box and isolate it, so it only runs on 230V.
This washer is a dual 230V/400V machine, there is a box at the back of the washer were the mains cable go in, which shows how to wire it to either 230V or 400V configuration, if you use it in 400V mode, the heater output wil be at 3050W, on 230V the heater output wil be reduced to 2100W.
in Picture 10, the machine is in 400V configuration this is what the previous owner has used it in, 2 year ago when i did not have a dryer, there was a 400V outlet were the washer is, but when i bought the dryer i needed 2 outlets so an electrican changed that to 2X 230V outlets, so i wil need remove the black cable which makes it 400V from the box and isolate it, so it only runs on 230V.
