Mark-- You have no reason to feel guilty; that's not my intent. I certainly don't feel guilty using the Speed Queen, but I am cognizant of the fact that I'm using more water & energy than is needed to get the job done.
While I haven't found it necessary to add water to the front-load washer, if I think a load requires an extra rinse, I have no problem pushing that button. I use bleach in anywhere from 1-4 loads per week, and naturally, I always use an extra rinse for those loads; the bleach being dispensed (quite wisely) in the first rinse.
I sometimes use the Steam option because I like the hot, extended 1st rinse and the warm 2nd rinse--love it for loads of bath towels. The same goes for the Allergy option, which heats the wash water to around 130 degrees (cold rinses). Those options increase energy usage only a little, and don't increase water use at all.
Funny but true: On which washer did I raise the maximum water level by about 6 or 7 gallons? The already high energy-/water-using top loader, LOL! Doing so increases the maximum capacity of the machine enough to justify it. And I'm getting better about using only enough water in the SQ to do the job--items move well, but are not swimming in gallons of open water. I so wish SQ made a model with a suds-saver. I grew up with one, and would put it to good use! It makes your 2nd (or even 3rd if items are lightly soiled) load almost as energy/water efficient as a front-loader. The Australians still get them; why can't we?
While I haven't found it necessary to add water to the front-load washer, if I think a load requires an extra rinse, I have no problem pushing that button. I use bleach in anywhere from 1-4 loads per week, and naturally, I always use an extra rinse for those loads; the bleach being dispensed (quite wisely) in the first rinse.
I sometimes use the Steam option because I like the hot, extended 1st rinse and the warm 2nd rinse--love it for loads of bath towels. The same goes for the Allergy option, which heats the wash water to around 130 degrees (cold rinses). Those options increase energy usage only a little, and don't increase water use at all.
Funny but true: On which washer did I raise the maximum water level by about 6 or 7 gallons? The already high energy-/water-using top loader, LOL! Doing so increases the maximum capacity of the machine enough to justify it. And I'm getting better about using only enough water in the SQ to do the job--items move well, but are not swimming in gallons of open water. I so wish SQ made a model with a suds-saver. I grew up with one, and would put it to good use! It makes your 2nd (or even 3rd if items are lightly soiled) load almost as energy/water efficient as a front-loader. The Australians still get them; why can't we?