Beko Heat Pump Dryer

[vacbear58]

Filters

Just the two Mike, the "normal" one in the door and the other black sponge one on the lower LH side of the machine and thats it. The sponge filter needs to be cleaned every five loads - I was surprised by how much it trapped, more than I thought just by looking at it.

Al

 

[chestermikeuk]

AEG

Hi Brendon, can you take another picture further back or wider , I cant work out what the carrier looks like, so yours has the door filter, then a another fine filter and then the black sponge pad?

Is it me or does there appear to be more FINE POWDER RESIDUE with the heat pump dryers, or does a normal condenser somehow keep it in the water etc??

Or does the heat pump do such a good job of getting rid of all the moisture that its seperating the fine powder from the water??

Thinking about it even when the loads are dry in a condenser, the workings of the dryer are still moist or wet whereas the Heat Pump dryers appear not to be so!!

 

[suds]

Filters....

Mike! Pics as requested. Here's the further back view

 

[suds]

Cont...

The filters closed....

 

[suds]

Cont...

Filters open....they seem to have the same density to the mesh oddly enough

 

[suds]

Lastly...

...there's a dinky microfilter which slots into the bottom - that's it no black sponge or similar...

 

[suds]

Lol...

...whilst taking these pics the whole family decided to take part,

 

[suds]

.

 

[chestermikeuk]

AEG

Thanks for clarifying with the pics Brendon, lets hope these heat pump systems are easier to maintain than condensors...

Great to see your little cuties as well, do they run away when on spin or like the heat from the dryer??

 

[richardc1983]

Mine comes tmrw (Friday)

 

[mikeklondon]

Your New Dryer

Nice looking machine AL, I wish you well and look forward to an update on how you find it when you have been using it for a while, I bet you’ll find you use a lot of the programs later

 

[richardc1983]

Sorry to rekindle an old thread!

Ive had the dryer now nearlly a year. Warranty nearly up but a question for you. When your drying bedding consting of 4 pillow cases, fitted sheet and duvet cover I find this dryer tangles them all up into a ball... Thats also ensuring that the buttons to the duvet are fastened so things don't go inside, they still roll into a big solid ball.

I expect the issue is because its only got 2 drum paddles or the fact the reverse tumble only lasts literally 5 seconds before going forward again.

Have you had this issue?