Bosch and Siemens

[ronhic]

I was having a look at the new Bosch and Siemens washers at one of the electrical retailers and noticed a couple of things.

Firstly, the door shape has changed to a 'stepped' design. Next thing I noticed is that there appears to be a recirculation nozzel similar to a Zannussi Jet system incorporated at the 11 o'clock position in the bellows...

So my question is:

Have Bosch and Siemens started to use a simmilar system to Zannussi?

 

[newwave1]

Hey!
That will be the cacade fill jet, avaliable on the mid-high end models, my 1998 bosch WFF2000 has it, it fills through it on the prewash and rinse cycles and stops when the machine has finished filling! My starts when the machine is spinning at 1000rpm! It's cool to watch!

Darren

 

[ronhic]

Ahhh....

That's the first time I have noticed it on Bosch machines.

 

[logixx]

Here's one filling

<object width=425 height=344><param name=movie value=></param><param name=allowFullScreen value=true></param><param name=allowscriptaccess value=always></param><embed src= type=application/x-shockwave-flash allowscriptaccess=always allowfullscreen=true width=425 height=344></embed></object>

 

[ronhic]

Logixx

Thanks for that...

How the hell did I miss that when I was looking not 12m ago for mum? it is something that I had never seen before.

 

[bertrum]

hi logixx,

despite what it looks like its not filling, the recirculation pump is spraying water over the clothes to aid wash quality, it will do this throughout the cycle.
It fills through the dispenser hose inside the machine.

 

[logixx]

I don't think B/S/H ever employed recirc pumps. Here's the link to all the videos:

Alex

YouTube

Share your videos with friends, family, and the world.

www.youtube.com

 

[favorit]

it's a cascade fill, no recirculation pump

Hi Bertrum, Alex is right [not a case ... his nickname is Logixx ;-)]

BSH introduced it in these machines like Darren's one. I' ll post a scan from the catalogue (3D system drawing) if my scanner comes back to this world (crappy driver)

Miele copied this cascade fill and introduced it on the W2000/W3000 to rinse away that boring foam that sticks on the glass

Darren , is that a spin rinse or does it start filling 4 the next rinse while it is @ full speed ?

 

[jwilson00]

Thats my baby

Siemens ASR washer.

 

[bertrum]

hi favorit,
Spot on favorit, you are right the machine is filling, its not a recirculation pump, didn't think too hard when I posted that.
Funnily enough I fitted two door seals with the fill hose last week, Doh!

 

[arrrooohhh]

This should make for faster wet down times.

 

[rolls_rapide]

Bosch 'Cascade' fill...

My mum's Bosch has this feature, but it never actually 'jets' on to the laundry. Instead, it flows down the door glass and flushes foam out of the doorseal folds.

The Hoover 'New Wave' version was much more entertaining to watch!

 

[jwilson00]

cascade

When we had our old bosch with the cascade i saw it a couple of times managing to go beyond the door glass and onto the clothes during the slow down from spin, our water pressure here seems to change all the time, shortly afterwards it never happened again.

With this siemens i have noticed i have to keep the water jets completely clean otherwise the softner compartment fills up and dispenses too early, although i have noticed recently the water is still getting into the compartment but not enough to dispense, whether this is to do with our water pressure / flowrate going up again in the past month i dont know.

Does anyone know what the 3D aquaspa feature on the bosch does? i thought that water came from 3 different points in the drum but with this washer and my bosch i have never seen this.

 

[newwave1]

3-D Aquaspa

Basically..The water fills from the bottom, the back and sides..."while the specially designed paddles move and shower the water over the load! & as they love to put in my brochures the 4th "dimension" is the cascade!

Water pressures quite high where i live jay & while the machines slowin down i'm pleased to say it hits the centre of the load with no trouble. Though i know other friends who's bosch machines have just dribbled down the door!! Like Jon's old bosch did.

Darren

 

[jwilson00]

.

My nan and grandad had the same bosch as you've got and theirs used to dribble down the glass Shame that machine went think it was coming up to 9 or maybe 10 yrs old and the computer board went.

I never remember it being as noisy as the newer bosch or my siemens. Is yours still all ok?

 

[newwave1]

Hey jay,
Hmm my bosch has seen better days the pump is so loud and sticks i've bought another but i've not been motivated to fit it, the motors getting rather scratchy on spin and it rumbles abit. In truth i'm holding out for something new on ebay!! Don't tell the wife though! lol!!!

Darren

 

[mark1973]

Heres a couple of pics of my New Wave filling through the fill nozzle at the top of the door seal. Sorry they are not that clear:

Mark

 

[mark1973]

Pic 2

 

[newwave1]

mark!!!! when did you get a new wave?!?! which model? any chance of a full picture? hope you are well??? Darren