optima
Well-known member
Aquarius8000
You are 100% correct about the pressure switch not being the original one.
You are 100% correct about the pressure switch not being the original one.
Credaplan
- Thread starter optima
- Start date
Help Support :
optima
Well-known member
Can anyone notice the repair job that was made by me on reply 7 picture. It really annoys me that a perfectly well made machine was replaced & it only needed a simple repair !!!
supermaticjames
Well-known member
It isn't something to do with the wiring loom by any chance?
Always a weakness in the classic Hotpoints.
James.
Always a weakness in the classic Hotpoints.
James.
optima
Well-known member
Tacho
Terminal Block on the tacho wire to the Motor. The machine must have had a repair done in the past & it must have been sandwiched between the lid & the cabinet & in time during friction from spin drying it must have shorted.
Terminal Block on the tacho wire to the Motor. The machine must have had a repair done in the past & it must have been sandwiched between the lid & the cabinet & in time during friction from spin drying it must have shorted.
This Creda Set Has Been Sitting on fleaPay For Almost A Year
Without so much as a nibble. Was at one time tempted but the whole thing has too much of a whiff about it for me.
That wouldn't pay that kind of money for a used front loader without being able to look under the bonnet.
http://www.ebay.com/itm/CREDA-WASHE...633?pt=LH_DefaultDomain_0&hash=item589c5f9839
Without so much as a nibble. Was at one time tempted but the whole thing has too much of a whiff about it for me.
That wouldn't pay that kind of money for a used front loader without being able to look under the bonnet.
http://www.ebay.com/itm/CREDA-WASHE...633?pt=LH_DefaultDomain_0&hash=item589c5f9839
As an eBay Associate we earn from qualifying purchases.
optima
Well-known member
Creda
Well yellowed with age
Well yellowed with age
