Here is a free-standing Gas self-cleaning "dual-fuel" standard sized oven ( 30" / 75cm) THAT WORKS ON 120V.
It has standard gas oven and broiler burner tubes. Broiling is done with gas as is surface cooking.
There has bbeen a small 120 v electrical heating element added to the bottom of the oven. Gas pre-heats the oven to within a few degrees of "target" temperature. Electric element swithces on; gas is cut off. The electic element will maintian the oven temeprature. Should the door be left open for a period of time, wherby the temperature falls below a certain nubmer of degrees below "target" the gas element will again fire-up to bring the oven back to the range where the electric element can maintain the temperture.
Quite an interesting gimmick. Great for those who can't run a heavy-duty 220v line for a standard "dual-fuel" or pure electric range/ cooker.
Remember here, on a 120v line, the wattage that can be squeezed thorough a 20a appliance circuit is quite limited.
Same wattage on lower voltage has a greater ameperage, requiring heaver gauge (thickness) wiring.
Watts = volts * amps
Watts/volts = amps
3500w / 240v= 14.6a
3500w / 120v= 29.2a
This cooker only requires a 15a 120v dedicated circuit so I'd say it's 1,400 to 1,800 watts, max.
http://www.geconsumerproducts.com/p...s/appliances/cooking_products/dualfuel_06.htm
It has standard gas oven and broiler burner tubes. Broiling is done with gas as is surface cooking.
There has bbeen a small 120 v electrical heating element added to the bottom of the oven. Gas pre-heats the oven to within a few degrees of "target" temperature. Electric element swithces on; gas is cut off. The electic element will maintian the oven temeprature. Should the door be left open for a period of time, wherby the temperature falls below a certain nubmer of degrees below "target" the gas element will again fire-up to bring the oven back to the range where the electric element can maintain the temperture.
Quite an interesting gimmick. Great for those who can't run a heavy-duty 220v line for a standard "dual-fuel" or pure electric range/ cooker.
Remember here, on a 120v line, the wattage that can be squeezed thorough a 20a appliance circuit is quite limited.
Same wattage on lower voltage has a greater ameperage, requiring heaver gauge (thickness) wiring.
Watts = volts * amps
Watts/volts = amps
3500w / 240v= 14.6a
3500w / 120v= 29.2a
This cooker only requires a 15a 120v dedicated circuit so I'd say it's 1,400 to 1,800 watts, max.
http://www.geconsumerproducts.com/p...s/appliances/cooking_products/dualfuel_06.htm