Having seen posts from AW members PinkPower4 and Ladd, along with input from many others in various threads/posts, I'd like to gather information related to the TC5000 and how it differs from the 2017 Series 9 in this thread. Sort of a 'before and after the TR series disaster' look at the brand's toploader.
Interesting changes were made during Speed Queen's "lost year."
NORMAL ECO CYCLE:
In the video below, Eugene (lorainfurniture) runs a complete Normal Eco cycle on the TC5000 with the Heavy Soil option (there is no 'Heavy Duty' option as the title of the video suggests; we all know what he means). The cycle does, indeed, run for 59+ minutes, and most of it is agitation. A heads-up about the new super-extended cycle was gleaned from a TC5000 cycle chart someone posted recently. A video commenter states they clocked about 25 minutes of wash agitation. That is some serious wash time and will undoubtedly boost cleaning scores in the next CR test.
CR tests washers on the Normal cycle with the heaviest soil level option. They also test using an 8-lb. load, which shouldn't ding the score for 'gentleness to fabrics' too much. However...if you stuff the TC5000's tub with a maximum-capacity load and let 'er rip on the Normal cycle coupled with the heavy soil option you may find yourself pulling a lot of shirt buttons from the bottom of the tub at the end of the cycle. And here’s why:
In default mode, the TC5000 fills to—what is on my Series 9–the 'medium' water level. After about 10 minutes of agitation, the machine stops and fills to the 'large' water level. After a 5 minute soak, agitation continues until the spin/spray rinse protocol begins.
By contrast, the Series 9 fills to the selected water level (small; medium; large; ex large). I’m going to assume this potential problem is avoided by selecting the Deep Fill option when washing a big load on the Normal Cycle.
Differences so far in the cycle:
The Series 9 fills to the selected water level; score 1 for it. The TC5000, however, fills with the actual water temp selected. The Series 9: If warm or hot water is selected, it fills with a few inches of warm water, then switches to cold for the remainder of the fill. Score 1 for the TC.
The Series 9 agitates for 6-14 (or so) minutes depending on the soil level selection. The Magic Minute-like initial agitation with a more concentrated detergent solution on the TC5000 is great---although I wouldn't want a maximum-capacity load of clothes subjected to high speed agitation for that long before more water is added.
Spray Rinse Protocol: The TC5000's (like the Series 9's), first spray rinse occurs when almost all the wash water has been spun from the tub. Here's where things differ: The TC5000 continues to spin and occasionally spray rinse without stopping until the final (high speed) spin begins.
The Series 9: The spin stops momentarily at the same time it would if it was going to fill for a deep rinse. Then it kicks back into another slow spin. A spray rinse occurs immediately--which I like because the tub is still moving slowly; gives the water more of a chance to penetrate the load. Toward the end of this '2nd spin' there's another spray rinse. Spinning stops momentarily before proceeding to the final (high speed) spin. This last bit is the same as the TC 5000.
[this post was last edited: 9/15/2019-14:18]
Interesting changes were made during Speed Queen's "lost year."
NORMAL ECO CYCLE:
In the video below, Eugene (lorainfurniture) runs a complete Normal Eco cycle on the TC5000 with the Heavy Soil option (there is no 'Heavy Duty' option as the title of the video suggests; we all know what he means). The cycle does, indeed, run for 59+ minutes, and most of it is agitation. A heads-up about the new super-extended cycle was gleaned from a TC5000 cycle chart someone posted recently. A video commenter states they clocked about 25 minutes of wash agitation. That is some serious wash time and will undoubtedly boost cleaning scores in the next CR test.
CR tests washers on the Normal cycle with the heaviest soil level option. They also test using an 8-lb. load, which shouldn't ding the score for 'gentleness to fabrics' too much. However...if you stuff the TC5000's tub with a maximum-capacity load and let 'er rip on the Normal cycle coupled with the heavy soil option you may find yourself pulling a lot of shirt buttons from the bottom of the tub at the end of the cycle. And here’s why:
In default mode, the TC5000 fills to—what is on my Series 9–the 'medium' water level. After about 10 minutes of agitation, the machine stops and fills to the 'large' water level. After a 5 minute soak, agitation continues until the spin/spray rinse protocol begins.
By contrast, the Series 9 fills to the selected water level (small; medium; large; ex large). I’m going to assume this potential problem is avoided by selecting the Deep Fill option when washing a big load on the Normal Cycle.
Differences so far in the cycle:
The Series 9 fills to the selected water level; score 1 for it. The TC5000, however, fills with the actual water temp selected. The Series 9: If warm or hot water is selected, it fills with a few inches of warm water, then switches to cold for the remainder of the fill. Score 1 for the TC.
The Series 9 agitates for 6-14 (or so) minutes depending on the soil level selection. The Magic Minute-like initial agitation with a more concentrated detergent solution on the TC5000 is great---although I wouldn't want a maximum-capacity load of clothes subjected to high speed agitation for that long before more water is added.
Spray Rinse Protocol: The TC5000's (like the Series 9's), first spray rinse occurs when almost all the wash water has been spun from the tub. Here's where things differ: The TC5000 continues to spin and occasionally spray rinse without stopping until the final (high speed) spin begins.
The Series 9: The spin stops momentarily at the same time it would if it was going to fill for a deep rinse. Then it kicks back into another slow spin. A spray rinse occurs immediately--which I like because the tub is still moving slowly; gives the water more of a chance to penetrate the load. Toward the end of this '2nd spin' there's another spray rinse. Spinning stops momentarily before proceeding to the final (high speed) spin. This last bit is the same as the TC 5000.
[this post was last edited: 9/15/2019-14:18]