Faulty bosch.

[hotpoint9534]

Hi Darren,

Glad you went for the new pump on this one. At this age it might be worth checking the carbon brushes to see how much wear there is. Don't let them go too low as the motor could become damaged on these models.

Tom.

 

[newwave1]

Hi chaps!
I have recieved the pump it only took a day for delivery! It only came from a shop in grimsby about 20miles away i think or more i forget.

I will replace it on the weekend I'm workin 50hours atm and with bambino i've hardly had time!

D

 

[newwave1]

Hey guys,
So i've got my pump and i'm planning to do the changeover today, however i was thinkin i would try and change it from the bottom of the machine so i don't have to strip it down as i'm not o'fair with how bosch machines come apart i.e the controls, do they pull off? Do you have unscrew anything. And i don't really want to have to mess around realigning the door seal and spring. But having looked through the panel at the bottom, the jubalee clips holding the hoses to the pump are pointing upwards. I do think it would be possible to change it from underneath but axcess will be compromised.

Any input from anyone would be cool

Darren

 

[seamusuk]

Hey Darren...

Im not sure how it comes apart unfortunatly ..

Im gonna ask what nobody else has- whats your temporary machine whilst the Bosch is out of action- Zanny maybe?

Seamus

 

[newwave1]

Hey seamus
Unfortunately time ran away from me tonight. And working 6days a week atm. So next sunday will be pump changin day!

Oh the bosch is still working! It's just the pump keeps stickin sometimes so i thought it'd be best to buy a new one for it. Only cost me £10 on ebay!!!

Hope your well

Darren

 

[chestermikeuk]

Pumps

Hey Darren, does this model have a solid base?? can you not get at the pump from the back, tilting the washer forward if required etc??

good luck, I dare say with all work and then more with the little one life is pretty full on!!take care, Mike