Frigidaire 1-18 parts...

[hippiedoll]

DaveAMKrayoGuy/Dave:

Thank you for the heartfelt well wishes. Truly appreciated my friend.

Thank you again.
Take care, be well, stay healthy & safe.


Much love,
HD/"C"

 

[hippiedoll]

jons1077/Jon:

I'm speaking with Roger right now and he says the transmission parts are what FRAN was chewing up. So the transmission is shot.

I'm sorry for the bad news.

 

[hippiedoll]

Rollermatic/Peter:

The agitate arm is worn out on FRAN.

Sorry for the bad news.

 

[hippiedoll]

Bigalsf/Alan:

Are you still interested in the control panel I posted the picture of, up above? Please get back to me & let me know so we box it up if you are.

Thank you.

 

[thomasortega]

pulsator cap and bleach dispenser?

Mine just finished cracking and the cap pops out in the middle of the wash.

OR.....

A matching FS dispenser. (and the bleach dispenser cup as well)

 

[hippiedoll]

 thomasortega:

All the agitator caps that I had, are gone now.
As for the bleach dispenser, I never had one of those for neither of the Frigidaire 1-18 washers that I had.
Sorry...

As for the fabric softener dispenser, I bought a brand new one off of ebay when I got the first Frigidaire 1-18 (Almond). But I could never get it to fit onto the agitator. So I believe it's for the mid-late 60's Frigidaire solid tub washer agitator.

Sorry I don't have the parts you're needing. I hope you find the parts you need. Keeping my fingers crossed for you...

 

[rollermatic]

hi

i know you said the transmission was damaged but if the agitate arm itself is still fuctional i will gladly buy it from you. have been looking for one to fix my 1-18. please let me know!

thanks

[email protected]

 

[hippiedoll]

Rollermatic/Peter:

Roger came over and we tried getting the agitate arm for you but it was worn out on FRAN.

Sorry for the bad news about the agitate arm.

 

[swestoyz]

Christina - would you be interested in selling the solid tub fabric softener dispenser?

Ben

 

[hippiedoll]

swestoyz/Ben...

Yes, I’ll sell the solid-tub fabric softener dispenser.

Send me an email and we can exchange info.

Thank you for reaching out.

 

[firedome]

red cabinet...

I have a complete '78 or '78 1-18 parts machine that I got for spares for my '74 Gold Crown W2, everything except for it's former avocado cabinet and base plate.
Pictured stripped and with PhilR when we got it. Wish I were closer, I'd buy the entire Poppy cabinet from Fran and make a complete "new" Poppy machine!

 

[laundryboy]

Fire dome

I’m jealous you ha e a full spare machine. I’m looking for one here in Orlando. Mine has sprung a leak. I need to tear into it and see if it’s the bellows or worse. Otherwise it’s in pristine shape. Also. Red a new dryer drum.
Chris.
I have lots of great friends in Binghamton. I’m from Moravia area.
Chris.

 

[hippiedoll]

firedome/Roger:

Fran's Poppy cabinet and Almond internals are Nate's. What I have are the Almond cabinet & the original 1973 Poppy internals.

So Fran's cabinet is already gone.

 

[rollermatic]

saw your reply to me

if you are interested i will buy that agitate arm from you, whether it is damaged or not. just let me know.

 

[firedome]

Chris...

if I don't follow through with my Harvest Gold machine - I'm getting old and energy is getting harder to come by - I'll be sure to let you know. I may even decide to let the '74-ish Harvest Gold machine go WITH all the spare parts as well, at some point, because at 70 increasingly I'm running out of gas, and I still have a car and summer house to finish yet. Last pic is bad seal. I have a new seal and a perfect tub to replace the original tub (shown) with a small rust spot too.

 

[hippiedoll]

Rollermatic/Peter:

I just sent you an email reply right now. I'll be waiting to get an email reply from you soon.

HD/C

 

[rollermatic]

Hi

Just sent you an email.

Thx

Pete

 

[laundryboy]

Awesome.

That would be amazing. I really want To get mine to stop leaking. And the dryer drum fixed too. I’ll be in Moravia soon to check the house and visit. I make it to Binghamton a lot too. Love number 5 and corrteese pizza.

 

[firedome]

1-18 parts and machine...

Chris... please eMail when you think you may be around. We're in VT a lot in the summer so a heads up well in advance is good. We're in major de-cluttering mode in prep to a potential consolidation and move up there, so both the complete 1-18 and parts machine, also a mint KDC17 with 2 complete panel sets (in Harvest Gold and Coppertone) may well be available... cheap!

You picked 2 of the best in town, Jim McCoy just closed Number 5 but his other place (also excellent) Lampy's, is now McCoy's Chop House, v similar to #5 foodwise. Cortese, another local favorite, is still going strong, we were last there a couple yrs ago.

It's hard to find bad Italian around here. The most famous one is Oaks Inn, the fav of the local mafia from the notorious 1958 bust that happened about 5 mi from there...the place still looks like 1958 too:

https://en.wikipedia.org/wiki/Apalachin_meeting

 

[rollermatic]

Hey firedome

Sent you an email
Thx
Pete