philr
Well-known member
This defies standard human dishwashing logic, which assumes
<span style="font-size: medium;"> "if it's pointed down and in an unobstructed location, chances are it will receive water." </span>
[COLOR=#000000; font-size: medium]<span style="font-size: large;">Apparently, this wasn't Frigidaire's logic with the very first dishwashers they made![/COLOR] You can get decent results in a Spin Tube as long as everything deep points the spin tube on the top rack and forget putting anything else than plates or very shallow bowls on the lower rack as they need to have their dirty side slightly angled upwards so they receive water from the spin tube (or top constant rinse in 1963-64 models). there's no way water will get from under the lower rack to reach them! That probably explains why these dishwashers had no Pots & Pans cycle.</span>
<span style="font-size: medium; color: #ff0000;">
</span>
<span style="font-size: medium;"> "if it's pointed down and in an unobstructed location, chances are it will receive water." </span>
[COLOR=#000000; font-size: medium]<span style="font-size: large;">Apparently, this wasn't Frigidaire's logic with the very first dishwashers they made![/COLOR] You can get decent results in a Spin Tube as long as everything deep points the spin tube on the top rack and forget putting anything else than plates or very shallow bowls on the lower rack as they need to have their dirty side slightly angled upwards so they receive water from the spin tube (or top constant rinse in 1963-64 models). there's no way water will get from under the lower rack to reach them! That probably explains why these dishwashers had no Pots & Pans cycle.</span>
<span style="font-size: medium; color: #ff0000;">
</span>