GE Top-loader in the house
- Thread starter toggleswitch
- Start date
Help Support :
Can't have too many holes in plastic!
If there is not a hole where it needs to be, the water will travel UP till it finds one hence the staggered pattern of the holes.
Remember there were machines with non-perforated tubs. IMHO not a factor as to spin-dry effectiveness.
If there is not a hole where it needs to be, the water will travel UP till it finds one hence the staggered pattern of the holes.
Remember there were machines with non-perforated tubs. IMHO not a factor as to spin-dry effectiveness.
Let me have a peek....
I'm gonna pry that front panel off and get a pic for y'all!
STAY TUNED!
Same bet time, same bat station!
I'm gonna pry that front panel off and get a pic for y'all!
STAY TUNED!
Same bet time, same bat station!
Steve:
GE® 3.2 Cu. Ft. Super Capacity WasherModel#: WDSR2080DWW
GE® 3.2 Cu. Ft. Super Capacity WasherModel#: WDSR2080DWW
Steve:
GE® Extra-Large 6.0 Cu. Ft. Capacity Gas Dryer
Model#: DWXR483GBWW
I think this is my dryer.
Mine has a SS Drum.
(doing this from my job.)
products.geappliances.com
GE® Extra-Large 6.0 Cu. Ft. Capacity Gas Dryer
Model#: DWXR483GBWW
I think this is my dryer.
Mine has a SS Drum.
(doing this from my job.)
GE Appliances: Shop for Home, Kitchen, & Laundry Appliances
GE Appliances is your home for the best kitchen appliances, home products, parts and accessories, and support.
products.geappliances.com
It looks like the stainless steel drum is only available on the 7.0 Cu. Ft models.
Is yours perhaps the DRSR483GDWW?
products.geappliances.com
Is yours perhaps the DRSR483GDWW?
GE Appliances: Shop for Home, Kitchen, & Laundry Appliances
GE Appliances is your home for the best kitchen appliances, home products, parts and accessories, and support.
products.geappliances.com
YAH, Thank You.
Welcome to America, where bigger is better.
Welcome to America, where bigger is better.
Hose Extension
Went to Homo Depot and got me a hose extension!
and some magic magnet to bypass the lid switch
The washer drain hose does need to go into the stand-pipe thereby bypassing the slop-sink and the required pump for that sink.
Of course, it is easier than it sounds
Went to Homo Depot and got me a hose extension!
and some magic magnet to bypass the lid switch
The washer drain hose does need to go into the stand-pipe thereby bypassing the slop-sink and the required pump for that sink.
Of course, it is easier than it sounds
It leasks, natch!
Surgery of that magnitude usually has some complications.
Methinks i need to clamp each piece of rubber/plastic to a piece of metal pipe rather than to each-other.
Surgery of that magnitude usually has some complications.
Methinks i need to clamp each piece of rubber/plastic to a piece of metal pipe rather than to each-other.
Tested it with a *SMALL* Water level, as seen in pic.
Leaks like a sieve - *SIGH*
*LARGE* setting (actually a medium fill) goes to third row of holes from top.
*SUPER* setting goes to top row of holes.
Leaks like a sieve - *SIGH*
*LARGE* setting (actually a medium fill) goes to third row of holes from top.
*SUPER* setting goes to top row of holes.
Magnets to bypass lid switch.
Believe it or not this was taken while spinning!
Smart little manufacturers, you need TWO magnets to do the trick (or i'm an idiot!)
Believe it or not this was taken while spinning!
Smart little manufacturers, you need TWO magnets to do the trick (or i'm an idiot!)
OK I think I have posted WAY too much.
First time the washer is cheesy and the dryer is nice for me!
TA TA for now!
First time the washer is cheesy and the dryer is nice for me!
TA TA for now!
westytoploader
Well-known member
- Joined
- Sep 4, 2004
- Messages
- 4,485
Wait....
How about some action shots of the next load?? ;-)
How about some action shots of the next load?? ;-)
I'll try.
But the camera freezes the spin.
How can I get videos I make posted?
But the camera freezes the spin.
How can I get videos I make posted?
Yeah guy...what about those action shots!
well let's see if I can clear a day (to have a wash-in) with her highness Madame X.
If so come on down~~~~~ NY, NJ, CT, PA, MA, etc!
*We'll have the classic GE Filter-flo
*The new GE plastique mess,
*The Frid-Ge-More, it it has not flown the coupe to go to Yiayia Bubble's (grandma's) house.
* The EASY table-top washer is also still here....
If so come on down~~~~~ NY, NJ, CT, PA, MA, etc!
*We'll have the classic GE Filter-flo
*The new GE plastique mess,
*The Frid-Ge-More, it it has not flown the coupe to go to Yiayia Bubble's (grandma's) house.
* The EASY table-top washer is also still here....
westytoploader
Well-known member
- Joined
- Sep 4, 2004
- Messages
- 4,485
Let's see...first it was Madame Kurva...then Queen Cloaca, now Madame X.
I have a new name suggestion--since one of your favorite sayings is "Who luvs ya baby?", instead of Kojak, you could be Bojack!
LOL...be sure to include pics so us Southerners can participate vicariously! ;-)
I have a new name suggestion--since one of your favorite sayings is "Who luvs ya baby?", instead of Kojak, you could be Bojack!
LOL...be sure to include pics so us Southerners can participate vicariously! ;-)
mickeyd
Well-known member
looks over shoulder; begs for shower
Toggledeedee and Toggledeedoo
Easy Spin has a present for you
An aqua, Jet-Swirl GE fabric softener dispenser
Nice and clean, but from an old model that fits over a wide agi cap
When settled and ready for accessories, I'll send it to you.
Someone else wanted a mini-basket--have it
Again, old, for a three-vane wide-capped agi, plus matching filter-flo
Let me know
Toggledeedee and Toggledeedoo
Easy Spin has a present for you
An aqua, Jet-Swirl GE fabric softener dispenser
Nice and clean, but from an old model that fits over a wide agi cap
When settled and ready for accessories, I'll send it to you.
Someone else wanted a mini-basket--have it
Again, old, for a three-vane wide-capped agi, plus matching filter-flo
Let me know
SactoTeddyBear
Well-known member
- Joined
- Nov 25, 2004
- Messages
- 1,302
Re: Magnet to Bi-Pass Switch:
What if you use only 1-Magnet and place it in the opposite direction, centered on the Magnetic Rubber Cover, would that allow you to only need 1-Magnet to have the Washer operate with the Lid Opened?
Fun Times with a GE Wash-A-Matic {LOL}, Steve
SactoTeddyBear...
What if you use only 1-Magnet and place it in the opposite direction, centered on the Magnetic Rubber Cover, would that allow you to only need 1-Magnet to have the Washer operate with the Lid Opened?
Fun Times with a GE Wash-A-Matic {LOL}, Steve
SactoTeddyBear...
SactoTeddyBear
Well-known member
- Joined
- Nov 25, 2004
- Messages
- 1,302
Re: Magnet to Bi-Pass Switch:
What if you use only 1-Magnet and place it in the opposite direction, centered on the Magnetic Rubber Cover, would that allow you to only need 1-Magnet to have the Washer operate with the Lid Opened?
Fun Times with a GE Wash-A-Matic {LOL}, Steve
SactoTeddyBear...
What if you use only 1-Magnet and place it in the opposite direction, centered on the Magnetic Rubber Cover, would that allow you to only need 1-Magnet to have the Washer operate with the Lid Opened?
Fun Times with a GE Wash-A-Matic {LOL}, Steve
SactoTeddyBear...
