wmmalta
New member
I think that Haier series 82 machines are the worst of the Haier range. We have one which we bought in 2013.
This is a list of the damages it sustained throughout these last 7 years:
1. 2015: Shock absorber got rusty due to the dispenser leaking (design flaw)
2. 2016: Before even 3 years of age the spider broke. The machine stated to be 5 years warranty but the spider was not under the warranty.
3. 2017: Motor brushes finished. The motor which was 5 years warranty, also did not include the brushes' warranty. Here it is worth mentioning that the motor which is identical to the one in the Haier HW80-1203D, a much better model makes far less noise in the HW80-1203D than in the HW70-1282, even when the motors were swapped. I am guessing the controller is of low quality and makes the brushes spark more or something, making them go bad quickly.
4. 2019: the bearings became noisy, and were replaced, and the spider, which was close to breaking again was replaced too.
5. 2020: the bearings broke again and were replaced again. Now, one false move, and the appliance will be scrapped, I hope!
These were the damages, not to mention that the machine leaks out of the door and the dispenser, which made it all rusty.

This is a list of the damages it sustained throughout these last 7 years:
1. 2015: Shock absorber got rusty due to the dispenser leaking (design flaw)
2. 2016: Before even 3 years of age the spider broke. The machine stated to be 5 years warranty but the spider was not under the warranty.
3. 2017: Motor brushes finished. The motor which was 5 years warranty, also did not include the brushes' warranty. Here it is worth mentioning that the motor which is identical to the one in the Haier HW80-1203D, a much better model makes far less noise in the HW80-1203D than in the HW70-1282, even when the motors were swapped. I am guessing the controller is of low quality and makes the brushes spark more or something, making them go bad quickly.
4. 2019: the bearings became noisy, and were replaced, and the spider, which was close to breaking again was replaced too.
5. 2020: the bearings broke again and were replaced again. Now, one false move, and the appliance will be scrapped, I hope!
These were the damages, not to mention that the machine leaks out of the door and the dispenser, which made it all rusty.
