So after unloading it I decide to test it. I fill it with water, it starts agitating and everything seems fine. I toss in a 5 "garage rags" which includes a couple towels and the agitation starts really laboring. After tightening the belt it's fine. I drain it, then spin out the rags and quit for the night.
Weekend comes and I decide to do my load of whites in this washer. I fill it with hot, add the clothes, detergent and with 5 - 6 minutes to go, I add some bleach.
It goes through the wash fine, stops and starts to drain. Within 30 seconds of starting to drain, this poor washer got sick and puked ALL of the hot soapy, bleachy water all over the garage floor and after looking to see what in the hell was going on, I realized there was nothing I could do to stop it.
The bottom of the filter blew out, allowing the full tub water and all of the filter beads to pour out onto the floor.
So, here is my call for help. Does anyone out there have one of these "beer keg" type of filters they don't need? I can't do anything with this washer without the filter.
The red arrow below shows where they filter blew out, right inside that ring.
